fiat qubo locked after update

[chicco]

Hi, I have brought a ecu mjet QUBO 1.3 MJET 51832295_3546H780 you ? locked during the update, now I have found two files that have kindly posted here on the site, one specific for SPANSION S29CL016J and another not ? indicated, editandoli are not the same, on my ecu as the c memory'? a 58bw016 then not ? spansion(the difference I think is only in memory, but if someone clears your head I f? a pleasure), with both the file remains on, the light on the lock while the engine will not turn over not even.I wanted to try a full backup and eeprom riverginata, however, also place the file read and file that I tried to use.

[jolidj]

the idea and simple, if your spansion then the file from the build must be spansion.
if you can build the file in the exact nn you need to do a virgin nothing/

[chicco]

But recognize you ? spansion see it from the flash?

[jolidj]

the open and ec written ... so you have to retrieve bdm

[FidodidoTuning]

what you read is not ? h780,but 354BH794

[FidodidoTuning]

the flash it seems to me ok,second me you have to put a e2p virgin or you ? corrupted micro
on these when you do an update writes to the flash, and then a micro area

[chicco]

but the flash if the load with ecm titanium does not recognize it and does not find the driver this to me ? seemed weird.

[chicco]

I said a stupid flash recognizes it and with the chk exact even then I e2p or micro, someone has the micro to pass me since tomorrow I bring the car with the wagon?

[FidodidoTuning]

note that the exact data are these
MJD6F3HW04P
Num SW: 354BH794
Dis FIAT: 51832295
Cod OMO: 6F3.H731

[FidodidoTuning]

if you want to put a back up to try if all goes well,in the database of the forum fiat 500 c'? a back up
always hw04p,surely it should start,always 75hp and management turbo equal(instead of g.the point is not okay)
to see if in addition to the errors on the dpf ? everything is ok
the only thing if it is successful, you then have to defappare the file as your qubo has not...

[chicco]

probably ? managed to program the flash Num SW: 354BH794 replacing the 3546H780 with the update, but probably not ? worked fine with the micro.

[chicco]

Solved the problem by reprogramming the flash and micro software version before the attempted update, place in the files section of the original backup.