Edc17 mode read\write

[thekid]

Hi all, I'm getting close to complicating the universe of the Edc17 etc I would like to see what I have already seen? the method of read\write in bootmode for? requires removing the ecu and opening of the same with risks attached and connected. I wanted to understand how and if it was possible to read and write to these control units, leaving them mounted on the car via the Eobd socket of the car

[virus1976]

What is the law around, currently all the edc17 anti-tuning must be opened and placed in the boot-mode with the exception of the first edc17 WV and some med17 psa group, which can be done via obd

[munro]

on the med17 edc17 vag group the antituning it seems to me that it is in force from the second half? 2009...
then on this car reads the serial don't talk about it... for the rest, "I'm all ears"...

[E92_mpower]

true I confirm it, I also don't know if someone ? aknowledge but I heard that when made in bootmode then ? can do them in serial ? true? or only in some cases?

[thekid]

a question I saw a video where a bmw ecu edc17 was read by connecting the various pins as in boot mode but without open it to connect the cable with the R 100ohm ? can also this????

[duke]

a friend with edc17-if he has made in the serial that you have told me they have used cmd official

[michell]

a question I saw a video where a bmw ecu edc17 was read by connecting the various pins as in boot mode but without open it to connect the cable with the R 100ohm ? can also this????
the boot mode can be done only by opening ,place an image to make you understand, see the wire boot to the resistance ? already inside.....

[michell]

a friend with edc17-if he has made in the serial that you have told me they have used cmd official
yes, but always before 2009, because if there was the antituning you do , and then one thing essential
still have not cloned the edc17 so we're careful and we do a good boot mode so we sleep peaceful at all that can succere you can always go back...

[duke]

in fact, the car was on the end of 2008, of course, I also think the better the boot cos? you are ir? quiet then it depends on which type of programmer you use

[thekid]

and then there sn many other schemes with many more resistors

Yes, of course I know that the bootmode you can? do just by opening the Ecu and putting the wire boot in fact. For? in this video was not done and the ecu was read the same.

[magi1984]

then in the flush of the boot of the galletto clone c'? gi? the resistance to 1000ohm?
no need to add it then?

[magi1984]

but mostly, in that viudeo the links on the edc17 of the 320d are completely different from the links in the pdf of the cock
I enclose a screen of comparison, who me explain this difference????

[michell]

then in the flush of the boot of the galletto clone c'? gi? the resistance to 1000ohm?
no need to add it then?
I do not know ,because I fg..ori then your csvi I don't know how sn facts.....

[michell]

but mostly, in that viudeo the links on the edc17 of the 320d are completely different from the links in the pdf of the cock
I enclose a screen of comparison, who me explain this difference????
I'm sorry, i collegaamenti sn equal,looks good....

[michell]

anyway, yep, I don't know what is.... surely the law ,only with the pins on the ecu ...however I do not know can be that this ecu do do :::
also, because the ecu that we have on file not port this ecu....

[thekid]

in fact, I had seen that in the pdf file of the boot mode does not c'? this acronym Ecu maybe ? one of the first Edc17 that could be read so

[frantik3]

the law on the bench not in the boot tricore but with the protocol obd

[frantik3]

and the pin-out and pin-out there in the wingnut why? not ? of cock ))))))

[thekid]

and the pin-out and pin-out there in the wingnut why? not ? of cock ))))))

What do you mean by that ? the wingnut explains better than the cio? the pin out of the Ecu ? always the same

[magi1984]

and the wire boot off of the cock clone has already? the resistance to 1000ohm you know?

[thekid]

in some of the photos of the rooster clone you see the cable with the resistance integrated but I don't know if all have it mounted

[frantik3]

yes, but that pin out that the law he and magicmotorsport that goes well however you answer why? you wrote that it was not in the pdf tricore boot!!!
the resistance should be gi? inserted check with a tester the ohmic value should be with resistance