MPPS checksum

[alberto.bf]

Sorry I tried to install a new map on my car
fiat marea 110 hp EDC15C K-LINE with mpps v 12 says to me:
you need to fix the checksum before writing to this file!!!!
in red, who can help me?
Thanks Alberto.bf

[FidodidoTuning]

If you have modificatk the file using the driver automatically when you save it you corrects the cks

[alberto.bf]

No, I don't know!
but the wording of the error, or the fact the case that mella also on the other car that I have to enter the ecu.
Why, thank you.

[FidodidoTuning]

The words you, however, to remember it
Attach ori and mod it into a zipped file and I'll give you confirmation

[alberto.bf]

Then I have to compress?

[marco]

sorry fidodito tuning but if I have to read for the first time?

[alberto.bf]

Marco to me the law!
Or afraid to write, I don't know if I do damage?
" you need to fix the checksum before writing to this file!!! "
Thanks

[FidodidoTuning]

to read do not have problems
in writing, you must first correct the cks,so as not to block
however, as said before, if you change the map using the driver in the grid so to speak, and then save it
in automatic the cke ? correct
to attach it to go to advanced mode and attach the zip file

[virus1976]

Marco to me the law!
Or afraid to write, I don't know if I do damage?
" you need to fix the checksum before writing to this file!!! "
Thanks
As said fidodido if you have used the driver to change the map when you do the save is automatically corrected, otherwise ,if I'm not mistaken, you can also fix with mpps by clicking the button chksum present under the keys of reading and writing

[giarras]

if he asks you for the correction, just on the pc, you have the previously downloaded just press the key, checksum, mpps is the control and automatically corrects it..otherwise you must do as I have said above.

more information here:

https://www.professionalchiptuning.net/showthread.php?1165-correzione-cechksum-con-mpps

[alex68]

e-mail the file, maybe we can do it ourselves.

[sno74]

it is true you can not download files from the site me if you want them you can upload the zip and then you can see if the cks ? just so? go quiet......

[duke]

to me with the driver, and went well for? to be ir? sure I did also see a friend, trusted e-mail the file to give you a hand so you're quiet

[alberto.bf]

Good day.....
I have tried everything but to no avail it does not go!
I would not wish that was my mpps?
With galletto 1260 everything is ok, funsiona well..
Thanks

[FidodidoTuning]

But what have you tried
If you do not attach the files we talk about nothing
So nobody can help

[alberto.bf]

Hello, I do not correct!
The funny thing is that the words mella always..
in a few words, just open the program mpps sensa be attached to the machine,
I think that is a problem of the sw?
No ecu!
Thanks

[msport (exil77grande)]

Hello, I do not correct!
The funny thing is that the words mella always..
in a few words, just open the program mpps sensa be attached to the machine,
I think that is a problem of the sw?
No ecu!
Thanks

perhaps you have not understood,if not places ori and mod we can not help you.

[alberto.bf]

Thanks or solved............
It was a sw problem!!!!!!!!!!
Or installed a new one and funsiona correctly...
"no me more marked ck"
Thanks to tt

[FidodidoTuning]

you as a no....
the written correct the cks before writing to you always
also if your file is ? already correct
? a reminder of mpps

[alberto.bf]

Not the +...
And a previous version!
Linportante ? that or the problem is solved!
If you have the same problem try....
Hello Alberto

[FidodidoTuning]

Just blocks to the first control unit perk you forgot to correct the cks perk mpps yourself, it is recalled, then we can talk about it with you ? was like talking to yourself,you are not able to understand what you ? staho said.
Rileggiti calmly the whole discussion...

[alberto.bf]

Good day, we are talking about certainly the sw is not good!
If read with galletto 1260, in my car I deverto I do and I try in paco words and a guinea pig is 4 months, don't you ? never locked,
mpps was the first time I use it, but I didn't trust to the cks!
The ecu the mass with the cock and goes, now or downloaded another sw for mpps and gives me more' the cks, do you think the problem is still there, or you ? solved?
Thanks

[FidodidoTuning]

you as a no....
the written correct the cks before writing to you always
also if your file is ? already correct
? a reminder of mpps
Is not an error of the sw,normal that there is,is it possible that I can't explain it well?

[alberto.bf]

I thank you, I am writing here for this reason, solve problems together.
If I'm wrong and right that mello say, and for this I thank you!
But explain to me why with your procedure can not fix the problem?
Mistake in at least one step?

[sno74]

I think that FidodidoTuning has already? explained enough then keep in mind that at times you can? happen with mpps that says that corrects the cks, but then the car not start why? he has done so is experience and how much you use it then you learn how to know what best to do with one, or directly with another strumento..........

[alberto.bf]

I agree with you but then again I have replaced the sw of mpps with another version and it's not giving me + the words cks error, why?
Mello you know explain?
Thanks

[marco]

hello sno74 watch that fidodito he doesn't need your defense this forum mainly serves to understand if a person has a difficulty to understand the rispiega if instead fidodito no longer wants to speak on this subject and goal of it is not needed that you make these statements.

[sno74]

but I did not want to defend anyone cks calculates the program mpps him changing the version of the avr? up-to-date list of the cks, which before was not content then ? managed to solve the problem then if you want to make sure that you can? to help you understand you can do one thing, re-read the ecu now ? was written to save the file, re-open the ecm then upload all the file, we tell the mod that you did and the files that you have again re-read and you will notice that the cks ? been changed......

[marco]

thank you for your courteous reply sno74 but I'm sorry I did not understand as I do and I know I'm a little rinco but I venture to repeat what happens with this car, maybe we were inprecisi the cks it asks for it without ataccare mpps to the car. then I put mpps I turn on the framework asks me cks clik the left side where there is written chechsummi opens the search on the pc and I have to click on the fail ori. so I have to do. thanks

[sno74]

you say that your problem ? cks..... Then you should know that every time you make a change to the map or fix the cks varies then it is correct. Example let's take a map of the original read with mpps we want to exclude the egr open the map with ecm titanium this you automatically search for the driver as normal ecm, you have to search for you from the data of hw and sw of the ecu.... Then I open titanium selection from the folder that I saved the map ori that read with mpps him in the car, you find the driver, then upload them when you are ready to enter in 2d I see the map I'm looking for the address or the curve that I want to edit and then save the mod and him in the car, you calculated the cks... And when you find the wording of the mpps the cks ? calculated on the car go quiet after the mo at the time that I wrote the map the calculation of the cks you he does then you are affixed not we think of pi?...

[marco]

thank you for your patience and then you tell me to write freely without click. on the cks?

[sno74]

exact if the mod you made with his driver with a sw changes, the write and the car part that tells you mpps ? always a reminder I hope that you understand that the cks ? important to ensure that the machine starts.....

[alberto.bf]

Thank you, now I try with the titanium.
Can create problems, I have read all of the control units with galletto 1260?
I have re-read with mpps?
Thanks

[msport (exil77grande)]

Thank you, now I try with the titanium.
Can create problems, I have read all of the control units with galletto 1260?
I have re-read with mpps?
Thanks


everything is subjective and depends from case to case,if you do not have the appropriate experience, it's always worthwhile to read and write with the same serial I give you an example galletto clone the old type reads the file of the 1.3mjet 70cv with a size of 64kb (which are only the tables and, in fact, the titanium't even recognize him) while mpps reads the file with the size of 448kb that is complete and, in fact, the titanium with this dimension is the driver so be careful before doing experiments because block a control unit for such a banality' and' really by fools.

[sno74]

exact before writing or if you have any doubts continue to post otherwise, then when you are in trouble for a block it gets serious hello and good job....

[alberto.bf]

Hi, the ristallata with galletto 1260 without any problem..
I have to first understand how funsiona mpps .......... with titanium, and the procedure cks?

[FidodidoTuning]

Easier to as you explained, I can't
You're a little hard to understand :-D

[alberto.bf]

They are not hard but I don't want to go wrong or a bit more time I detico to the cks and mpps,
I can't afford to lock the ecu .
Thank you for the help fidodido

[alberto.bf]

Cioa sno74, I read the ecu for the first mapping with galletto 1260,
the hypothesis?
Can make me lerroredel cks why re-write it with mpps?
Thanks....

[nuovaecu]

I also have the same problem with a grandepunto mtj 1.3 tells me that I have to correct the ceksum with mpps and to tell the truth or fear to program even if the saved drivers

[alberto.bf]

I have put a program more old nn but I trust...
If you or a little ditempo Sunday, I'll try.
Or seen that with the titanium corrects... quietly and I'll try it..