Opinion the map Lancia Ypsilon 1.3 mjet 70cv [Archive]

msport (exil77grande)

07-01-2013, 20:05

I'm sorry, but not center if you're the average user,that category only serves to distinguish those who are here just to those who are here from more time and has privileges to see attachments,screen and ask for the pass and then, according to me, here is the section for the discussion.

msport (exil77grande)

07-01-2013, 20:16

anyway, in the map you have just changed, 2 maps including the injection that is not good and a map called torque limiter # 2 that can go for the rest you have to do everything again.

abberello

07-01-2013, 20:43

On my titanium the map of the turbine is not c'? and the map torque limiter 2 and the torque limiter #3 that makes me change, are blocked. The injection map that I touched on what's wrong? Right x understand what I'm doing wrong...

marco

07-01-2013, 21:28

hello abberello the map that you are locked out are similar maps?

blackwolf76

07-01-2013, 21:39

loa map turbo don't see it as that car has the turbine adjustment mechanical, not electronic.

msport (exil77grande)

07-01-2013, 22:21

I honestly do not understood this of the locked maps.

marco

07-01-2013, 22:59

hello msport I have figured out that the table does not evidensiano.

msport (exil77grande)

07-01-2013, 23:09

hello msport I have figured out that the table does not evidensiano.

I figured that it knows how to edit him.

munro

07-01-2013, 23:42

I have no way to view the map? I can say that for a good map,and this applies to all types of ecu,the fuel demand and the limitations to this must be in line...what? for fuel I am referring to the maps pedal..or Driver wish that in the marelli mj6 as well as in many other request ? in Nm torque...

Team electronics

08-01-2013, 14:16

Holy words

abberello

08-01-2013, 15:12

On titanium 1.61 when I open the map torque limiter 2 on one axis there are the turns while on the other c'? the load. If I try to select only one parameter when I click on the value, nothing happens, not even highlights. What happens on the other maps...otherwise how would I change the values for the injection and the other the map of the limiter?

munro

08-01-2013, 15:28

parts from the mod in 2d..but for? initially you should moddare lim torque N?1...
in all the car has 9 lim torque....
7 are all as the N?2 while the other 2 are a function of the temp of the engine and another in the function of the temp diesel...
then there are the maps lambda 2....you are interested in moddare that for high iq......

munro

08-01-2013, 15:34

try this:http://img23.imageshack.us/img23/8290/limdicoppiamj6n1.(png http://imageshack.us/photo/my-images/23/limdicoppiamj6n1.png/)

Uploaded with ImageShack.us http://imageshack.us)

munro

08-01-2013, 15:38

then these:http://img685.imageshack.us/img685/269/limdicoppiamj6n23.(png http://imageshack.us/photo/my-images/685/limdicoppiamj6n23.png/)

Uploaded with ImageShack.us http://imageshack.us)

munro

08-01-2013, 15:41

and finally these:http://img832.imageshack.us/img832/7924/limdicoppiamj6n4567.(png http://imageshack.us/photo/my-images/832/limdicoppiamj6n4567.png/)

Uploaded with ImageShack.us http://imageshack.us)

Danny

10-01-2013, 19:28

Munro, but this above screenshot you posted, how do I have it on the ECM?
C'? something does not add up, I have currently only a file of a 90 hp, but aside from Injection choked, and 3 torque limiters, I can not find the other.
Thanks...

munro

10-01-2013, 19:38

you have to scroll through the file in 2d ... the cio? in mode? graphics in 2 sizes..if you do have the driver of the ecm can only do the "mappette" to 3 kilos a pound....

Danny

10-01-2013, 19:48

Perfect Munro. Unfortunately for? that ? the work that they do many of the "pseudomappatori" of which I do not trust you, why am pushed to learn...
That said, scrolling through, I have already? tried it, but how do I recognize one thing from another? I maybe the one ? date, from the drivers of the ECM, and I delete a priori control on those addresses. The rest of it?
I have the values in the Y-axis, to make everything more? clear?

munro

10-01-2013, 19:56

sets the size the more you agradano in 2d using the buttons 256x1 and the boxes size reading over the words "uses info driver" and scroll down the file until you see the curves that look similar to the pictures posted..then I start to moddare...

Danny

10-01-2013, 19:59

Thanks a lot Munro!
I want to reiterate that I like the spirit of the group which always helps! As soon as I finish studying, I am at work.......!

abberello

16-01-2013, 01:14

I hope I have made a small improvement...

19maury86

16-01-2013, 14:42

hello I would like to help you and see some your files but I do not have the permissions....who knows? if someone helps me in this.
however, I'll give you some tips. on this engine maps as a function of fuel temp are not active, and lambda even, you need to increase the injection p.to to your liking where do you want more? increase eye but if too much smoke...and especially after you understand how you read that map.
Map 1 nn touching it is not needed
limiter tiles 1 are 2 maps and ? driver wish
instead ? important on these engines the lim couple#2
lim torque#3 do not touch it serves no purpose.
find the other limiters by scrolling the map in 2d sn all neighbors except the first, and incremental with knowledge of the increases of fuel injection from the

zioweb

17-01-2013, 10:27

Metropolis

17-01-2013, 14:25

true very interesting to this document ;)

abberello

22-01-2013, 00:14

Here are the changes to the parameters kindly segnalatomi by Munro... what do you think?

These are all limiters right? now I should go to the map the pedal and injection?

munro

22-01-2013, 00:16

what criteria moddi the lim torque if not before, moddi the map pedal??

abberello

22-01-2013, 00:56

2464

Excuse me, that map ? this?

munro

22-01-2013, 01:04

it seems to be a map or lambda limiter fumes...

pabloescobar

22-01-2013, 10:01

I would like to gfuardare this map to give my own opinion? I joined yesterday and I do not open the file ori and mod, however, on these machines you tap the place, and the limiters torque, and without looking at the file I think the turbine ? mechanical

abberello

23-01-2013, 02:01

May I know on this map which are the addresses of the egr valve? where it begins and where it ends. Thanks

Metropolis

23-01-2013, 10:16

Abberello is the switch off of the egr ? a bit change..

19maury86

23-01-2013, 10:28

if you give me the rpm for ***** the map, I can tell you the address...

angelus.d87

31-03-2014, 17:03

067C4A this and address

angelus.d87

02-04-2014, 14:52

but the rail and in 8bit?

anniver

06-04-2014, 03:59

But the limiter turns and a bit on this map?

Danny

08-04-2014, 10:49

That ecm calls injection choked on 69, ? the rail pressure.
It is in 16-bit, and ? was told nll'the other discussion that has offset -100. Immediately after, you will find its limiter in the f temp, fuel, what ? the typical ladder.