PDA

View The Full Version : connect the upa ecu airbag w polo 2001



sno74
07-01-2013, 00:23
I have to fix the ecu w polo 2001 codoce vag 6Q0 909 61 TO my sw says to Program the Motorola MCU 68HC08AZ32 I have seen that within the program of the upa I have the wiring diagrams I just have to connect to do the reading, or better to keep other interests I enclose a photo link.......

2259

legendaryslave
07-01-2013, 00:56
you need to use quartz to be able to read that processor then I have to see if there is a security bite and that area is my advice and disaldare completely the processor from the pcb because the dotted lines indicate that you have to raise the presser foot I use the adattatotori to be welded with integrated quartz that I make it very easy for the job

sno74
07-01-2013, 01:10
the problem is that at the moment I only have the cable and I have adapters I have seen that there is a kit of adapters and you can see that on the adapters c'? a quartz then p3 and p9 must be raised here is the reason for the hatch to me is that the thing ? pi? complicated than I thought......

legendaryslave
07-01-2013, 01:20
I usually take them off from the board but for the comfort of my own because I really do not like and I do not find it convenient to sadare the threads on the processor, and 99 percent of the time you can't read then everyone has his own method, I say to you as I do, with a good station-hot air and a bit of patience in the work ? simple enough

sno74
07-01-2013, 01:27
ok tomorrow I'll call a colleague next to me and see if it has an adapter for this mcu then for desoldering hot air station with its adaptor let's say the square as the mcu I tried to solder the wires but it is not a easy thing, maybe even better unsolder all......

legendaryslave
07-01-2013, 13:07
andre' if you really have problems with me then send me you only pay for the shipping, I have already made I have many files that are tested and then you can also try the tour, however, no mount it on the car

sno74
07-01-2013, 13:34
thanks today I feel with my colleague tells me that he reads the mcu without desolder with a program I think that dashboard why? him ? specialized on the km I heard it this morning and told me that he has the wiring diagrams, however, if it fails don't worry you still tell then if c'? the fa will inform you what has used the file clear what it should I also....Interesting what you said, can you? try to tour then maybe explain to me also what I do not know how to do ....... I still have a jelly by eating to become a great like you? floor plan let's see what I conclude for now thanks...