Which protocol to use with magpro2 x Large Point of 1.3 mjt

[polini]

Hello does anyone know which of the 2 select with the magpro,I have to make a big point of 1.3 mjt 75hp and I already have the file ori I wanted to know in advance which protocol to use

happened or m58bw016 I enclose a photo unit

[admin]

To be safe you should open the ecu and see what fits,but to 99%, and a m58bw016

[FidodidoTuning]

On mpps, if you write spansion or m58 and the same protocol,according to me and the same thing
If you have a mpps do first and go for sure. ...
Do you know ke you need anke micro to write it with the mag?

[polini]

I don't know, explain to me the micro ?

[polini]

Thanks x the answer

[polini]

On mpps, if you write spansion or m58 and the same protocol,according to me and the same thing
If you have a mpps do first and go for sure. ...
Do you know ke you need anke micro to write it with the mag?

explain to me the micro ?

[James]

to be sure open it and see what c'? written on the processor, if a spansion, I advise you to do it in the bdm, and not in the obd

[James]

with galletto 2 almond-do it safely.

[frantik3]

the micro with the magpro does not have all the ecu serves and they ask you, however, if he asks the micro, ask here on the forum or read the whole bdm and do it before

[msport (exil77grande)]

I don't know, explain to me the micro ?

basically, the magpro, in many cases, when you write a 1.3 mjet 75-90hp asks well as mpc that you get from reading bdm backup everything,then how would you have advised or read and write in bdm and then eventually if you have to do other tests directly write in the serial since you have the backup, and even the mpc, or in serial with mpps.

[polini]

thanks x the explanation I have only 1 file ori without the mpc melo who can pass the mpc

[msport (exil77grande)]

thanks x the explanation I have only 1 file ori without the mpc melo who can pass the mpc

I'm sorry, you do not have mpps? in the case, as has already been said, write it with that but remember that the file must have a size of 1m and then, if 2m is to be cut.

[tezzero]

Hole in serial with mpps

[polini]

I have both the magpro v. 4.2 that the mpps v. 5

[FidodidoTuning]

Go with mpps and go quiet
Do ecu data
To fetch from the database the file ori
After with the ecm cuts and write in less than 2 minutes
If you have other issues, write a new discussion ke we are off topic

[polini]

basically, the magpro, in many cases, when you write a 1.3 mjet 75-90hp asks well as mpc that you get from reading bdm backup everything,then how would you have advised or read and write in bdm and then eventually if you have to do other tests directly write in the serial since you have the backup, and even the mpc, or in serial with mpps.

where can I find the mpc, I've tried but without results

[FidodidoTuning]

I don't understand perk you complicate life
Open a discussion on the request file and see if someone has...
I repeat, with mpps go quiet...

[carlo abarth]

cofermo l mpps dominates on the m-jet!!!!

[frantik3]

Test with mag if before writing asks you to open the file in mpc do not write!!!! Go with Mpps !!! If you must wait one day you step to me but I need to send the screen data to the ecu from the sw

[polini]

problemone the mpps has me blocked, the control unit

[polini]

Test with mag if before writing asks you to open the file in mpc do not write!!!! Go with Mpps !!! If you must wait one day you step to me but I need to send the screen data to the ecu from the sw
hello if I could get the mpc x the screen I have the picture of the controller in the first page

[frantik3]

Now you need backup !

[polini]

S? I need the backup

[frantik3]

S? I need the backup



https://www.professionalchiptuning.net/showthread.php?205-Grande-Punto&p=22442#post22442

[nuovaecu]

confirm and m58bw016

[polini]

https://www.professionalchiptuning.net/showthread.php?205-Grande-Punto&p=22442#post22442

thanks x the file , I can also try to rewrite it with the mag pro now....................

[sportknight]

sorry cos'? the mpc?

[msport (exil77grande)]

sorry cos'? the mpc?

mpc = microprocessor

[Xtreme0303]

emh....for curiosity?, how ? locked? low voltage or something else?

[angelus.d87]

I have written with the magpro and never had problems locking

[angelus.d87]

the magpro 4.2

[radd7]

sorry, but why? if the mag asks me the mpc say that you are not writing? how to recognize a spansion, on the other? for the guilder with the same engine with the mag, she always asks the mpc. instead, the mpps has the protocol for the point and will not report as the protocol to the guilder