PDA

View The Full Version : where is the relay pump bmw 320 e46 150hp 2003



FidodidoTuning
04-01-2013, 19:35
as the title I can not find where the relay pump bmw 320 e46 150hp 2003
the machine ? long time ke? firm and I do not get the current to the pump under
the fuse ? ok,but I can't find the relay
does anyone know?
thanks...

fabry
04-01-2013, 20:03
Hello Fidodido should be under the dash,there are 4 relays in a row and that of the pump if I remember well ? the first on the right.

munro
04-01-2013, 20:13
try here:http://bmwfans.info/parts/catalog/E46/Coupe/Europe/320Cd-M47N/RHD/N/2004/september/browse/
the relay, however, should be the number 3 color light green...

FidodidoTuning
04-01-2013, 21:28
thanks to you,my ******** he tells me that in the dashboard area there should be four relel in a row,the first and that of the pump
I can't seem to find them
can you tell me the precise point?

munro
04-01-2013, 21:39
should be behind the glovebox passenger side...

FidodidoTuning
04-01-2013, 22:00
There are only fuses

munro
04-01-2013, 23:18
try to see if removing the panel cover under the pedals on the driver you see something...
otherwise you have to search for in the box sealed by screws in the engine compartment, afianco the pompafreno..
if you don't li c'? nothing try to see behind the panel of the battery in the rear bonnet....
insommasto cabbage rel? somewhere they must be...

motorsport
05-01-2013, 00:20
check on the esi tells you more? precision!!

FidodidoTuning
05-01-2013, 11:27
Found...
You must remove the tray port objects...

munro
05-01-2013, 16:42
so have you solved it???

FidodidoTuning
05-01-2013, 17:01
You don't arrive the ground to the relay pump behind the port objects
The signal part from the main relay next to the ecu, but it does not reach the relay pump
In fact, if I should give mass to the relay the pump part...
Can someone see in your wiring diagrams if you actually sehnale mass to the relay pump part from the main one near the ecu?
Thanks...

elettro72
05-01-2013, 18:38
hello, but if you have ******** c? the diagram,on relay pump fuel, it seems to me that there are 2 fuses (f54 20ampere and f4 (10 ampere),f54 ? the positive . the power supply to the coil two wires:black/purple red/white red/white c? the fuse f4 10 amp,black/purple part from the pin n.32 of the control unit.........at least ******** gives me this if I'm not mistaken

FidodidoTuning
05-01-2013, 18:50
The fuses are ok
I have not had the tempp to check the wiring diagram to see the mass to the relay the pump when you open the picture where it comes from

robby51039
05-01-2013, 22:00
sorry fidodido've washed the car I took a lot of water?? try disconnecting the can?you to centalina engine blow and refit happened to me and by other means

FidodidoTuning
05-01-2013, 22:34
The machine ? was stopped for more than a year,I don't know if you have taken water
Thinking it may,I found anke water inside the injectors
Are blocked by the rust...

robby51039
06-01-2013, 00:23
I with a medium that had done the automatic washing off and then it was off moral short on the +15 dellecentraline I burned the fuses 15a brain that smokes and-a-half plant to air some arrival at ecu u I find it a bit of damp breath spray contacts and magic
I hope that the council is the solution!!!