light is turned on after preheating dpf removal

[fabry]

I deleted the dpf for a opel meriva 1.3 multijet hw MAG 01246O204D sw 3422M167 and after 2 days ? lit the lamp for the preheating. I have checked the termocandele and its unit of management, but it is all ok, the fault ? definitely file but even when gold stays on without any dtc's in memory failures. I did make two other files from other preparers (trusted) but not I come to ****. I enclose my file ori and mod

[legendaryslave]

frabry two things, check for continuity of the glow plugs if they are good monitors that are powered, check the consent from the ecu that goes on the rel? it can be the ecu ? gone already success I flew the rel? and in the last power used on the rel? if you see 12 volts

[fabry]

frabry two things, check for continuity of the glow plugs if they are good monitors that are powered, check the consent from the ecu that goes on the rel? it can be the ecu ? gone already success I flew the rel? and in the last power used on the rel? if you see 12 volts

[fabry]

no no the plant ? everything is ok, the lamp pre-heat on that type of car, also serves for the dpf.....

[legendaryslave]

you try to put another e2p

[fabry]

thank you, but the customer has taken the car and up to January could not? leave it, I think that I do? a reading bdm and then will see? if your in the 2eprom something is missing, comparing it with another thanks Fabry

[msport (exil77grande)]

I have this in the case should serve 3324M157

legendaryslave please when you post files golds for the issue of the order, and in such a way that everyone can immediately find what you need to put them appointed in the correct manner, in the section database files ori, of course, look for the brand name and model that you find in the database and then pasted into the discussion, in this case, only the link.

[legendaryslave]

I'm sorry, I can not edit the message, see if it works in the following way
https://www.professionalchiptuning.net/showthread.php?227-Meriva&p=20555#post20555

[tezzero]

the map is not there gets nothing..looks good elsewhere...

[msport (exil77grande)]

I'm sorry, I can not edit the message, see if it works in the following way
https://www.professionalchiptuning.net/showthread.php?227-Meriva&p=20555#post20555

so it is perfect.

[fabry]

the map is not there gets nothing..looks good elsewhere...

I can not find another if you think about something.....I would be grateful. I am the pi? used to work on the ford ka but similar problems I never had. Hello Fabry

[giarras]

fabry nn search + anything the problem, and right in the luca stanca ? happened to me, I had a pleasure to meet a friend in a workshop have defappato and the light of the glow plugs remained turned on and diagnosis any problem then I tried but nothing to do..you know how ? solved...it will be? was luck but I can assure you that the car has traveled at least 5000km without problems have riscaricato with the rooster clone processed the file with sw that I should be good to go, the cio? carsoftware fap/dpf and all ? okay..try cos? it may be that you have luck.

[tezzero]

It seems strange to me giarras but in our work there? no wonder nothing...let us know fabry are curious!!

[legendaryslave]

fabry nn search + anything the problem, and right in the luca stanca ? happened to me, I had a pleasure to meet a friend in a workshop have defappato and the light of the glow plugs remained turned on and diagnosis any problem then I tried but nothing to do..you know how ? solved...it will be? was luck but I can assure you that the car has traveled at least 5000km without problems have riscaricato with the rooster clone processed the file with sw that I should be good to go, the cio? carsoftware fap/dpf and all ? okay..try cos? it may be that you have luck.

it seems strange to me leaving the original file doveve disappear in the light, but as it says in the friend giarras does not muoce

[fabry]

in January I start the car and I try, but I want to try to write with the other interface, I do not want at the end is the new genius to have some problem.. ? already the second opel to have problems

[carlo abarth]

for me and a randomness .. maybe the ecu plugs from the hassle!!

[FidodidoTuning]

Some time ago, and happened the same thing to me anke on the same drive
In the opel flashes the light of the glow plugs, anke for errors on the dpf
I'd recommend you to replace l ori, make a rigenrazione forced in order to make clear the flashing light and then correct the file, surely miss something for the total disabling...

[fabry]

Hello Fidodido for? the strange thing ? that to me is solid,in reality, the opel I say that should be flashing, to cut to the chase, I replaced the control unit preheat and termocandele taken from the other car was the same, and the problem persists. I would also like to try another instrument you never know.

[FidodidoTuning]

I would do the test in the meantime, try returning it gold and make a rig forced and see the indicator light turns off,in the meantime, go to elimination,the problem is not ? mechanical...you have different ideas and tests to look for the defect.

[tezzero]

In fact, on the opel the light of the glow plugs also indicates other problems that relate to the glow plugs

[munro]

fabry..try to do a proxy alignment of all the ecu with a scanner....
have you ever seen that works.....

[fabry]

ok on the 7th of January, bring me the car and let? various tests, sure that the proxy alignment ? a good idea,I do? know

[explode82]

for me depends on the file worked,but if you want to remove all doubt,put the e2p virgin and see what happens,of course you need to recode the injectors

[freddyecu]

Try to check the value of the spark plugs, why? sometimes alters and increases its resistance value ... The light comes on when the ecu detects a current consumption lower than that of the 4 glow plugs...

[legendaryslave]

for me depends on the file worked,but if you want to remove all doubt,put the e2p virgin and see what happens,of course you need to recode the injectors
but then ricodificarla not ? like the fiat, which incorporates the code in there I thought well I'm in this thing

[explode82]

I know,but ? easy if you memorizzatoi the error,it will not be easy to remove it with flash gold

[legendaryslave]

how ? finished this story because I defappato a meriva and 'tacchete' two days and light the glow plugs on blinking

[explode82]

Hi legend, I advise you to check the file in case it was wrong, then get gold azzererei all the parameters and write the file again and would check the spark plugs

[legendaryslave]

Hi legend, I advise you to check the file in case it was wrong, then get gold azzererei all the parameters and write the file again and would check the spark plugs
I have done all the procedures you change the oil and dpf before loading the file, the only thing that is not riuscto are doing a rebuild as it is already been physically removed the honeycomb will do the tests you listed thanks for the response

[jared_poe]

Hi to all, you are able to turn the light off at the end? Should I make it a few days, I read with gallo2 time ago, according to you, the time works with these ecu?

01246o204d
3422m166

[legendaryslave]

Hi to all, you are able to turn the light off at the end? Should I make it a few days, I read with gallo2 time ago, according to you, the time works with these ecu?

01246o204d
3422m166

I have removed the lamp and the problem disappeared :cool:

[jared_poe]

Sorry, but in that sense you've taken away the light? Can I ask you a favour? I check the file that I read with the gallo2 clone? I have compared it with the ori posted at the beginning and many maps.

[legendaryslave]

Sorry, but in that sense you've taken away the light? Can I ask you a favour? I check the file that I read with the gallo2 clone? I have compared it with the ori posted at the beginning and many maps.
I removed the light from the picture if the reading you got from the serial appears to be different as I think you virtual

[pabloescobar]

Usually I clean the outlet of the form of the glow plugs, I add fat copper piecing and off everything