peugeot 307 no fap

[max75]

Hi all I wanted some advice on the exclusion FAP to this peugeot 307 16 HDI 90 hp 2145 read with mpps v12... you should always cut it to write!!!!!

[max75]

I noticed that with the ecm to the reported data of the ecu change...there is...

[cinqueturbo]

The Cut is only for the 1.3 mjet 70 to 75-90hp

[max75]

and then only for the marelli....

[FidodidoTuning]

the 70cv no,read and write the file ke read da448-452-64kb
according to ke what to read

[max75]

for when riquarda this I go quiet with mpps.....or I go in the bdm.... maybe think about it not having a backup ? best bdm, you never know...

[FidodidoTuning]

The v.12 I should avoid,I don't use it more after the blocks,these if you piantono in serial, not the resume more
Best bdm
I made with the new cock

[fa2st]

I can't even open the file with ecm titanium...there is? he says that I do not have the driver....

[msport (exil77grande)]

I can't even open the file with ecm titanium...there is? he says that I do not have the driver....

what you read?
because if it is the 64kb titanium could not recognize it,if it's 448-452kb and is not recognized by the titanium may not be gold.

[max75]

The v.12 I should avoid,I don't use it more after the blocks,these if you piantono in serial, not the resume more
Best bdm
I made with the new cock

if you lock in the serial, I can always resume bdm...right!!!...

[max75]

I ask the council to the file that I have tried can go......

[max75]

the file ? been processed with time.... c'? the off switch is also on the eec16c34...?

[FidodidoTuning]

You.but you need to back up before or compatible after by scodificare

[max75]

You.but you need to back up before or compatible after by scodificare

you've done the backup....then ? everything is in place....I proceed to write..

[max75]

little problem....when I turn it on the picture...for a fraction of seconds shows me the light in the shape of a triangle +info... fap low niveru-additiv.diagnosis there are no error.... I know that c'? you need to disable some of the sensor relative to the additive, for the rest vabbene...

[legendaryslave]

little problem....when I turn it on the picture...for a fraction of seconds shows me the light in the shape of a triangle +info... fap low niveru-additiv.diagnosis there are no error.... I know that c'? you need to disable some of the sensor relative to the additive, for the rest vabbene...
in bsi space to fap with the lexia

[max75]

in bsi space to fap with the lexia

sorry what do you mean with bsi....we want to lexia for the off!....right.

[legendaryslave]

no I did with the texa the bsi_body computer_elettronica centrale_centralina cabin

[ecuboost]

no I did with the texa the bsi_body computer_elettronica centrale_centralina cabin
do you mean that you've disabled the fap with the texa? or you have turned off the light with the texa?

[ecuboost]

but on the mpps v12 in the info check Leave" Key Off for at least 3 Mins After Prog", that is, leave the ignition switched off for at least three minutes after programming, can someone tell me the pu? give confirmation of qst thing?

[legendaryslave]

do you mean that you've disabled the fap with the texa? or you have turned off the light with the texa?
no change the setting in the bsi

[carlo abarth]

telecodifica and go!!!

[ecuboost]

telecodifica and go!!!
What does that mean? Anyway the fact of the three minutes that you say

[admin]

What does that mean? Anyway the fact of the three minutes that you say

It means that you need lexia self-diagnosis specific pegeout with this do-all

[ecuboost]

I have the texa, someone I can? say the procedure to turn off this warning? ? from a afternoon that I feel but I have not found the item

[ecuboost]

I have the idc4 last update as soft on texa

[Team electronics]

I think he wants to say that he has turned off the light with the texa anyway

[lupak]

Can someone explain to me the procedure with lexia?
I have to use pp2000?