bravo 1.6 Mjet euro 5 FAP?

[coma]

Hi guys,
has anyone ever removed the FAP from these cars?
do you know if I can use Time or Ecusafe?

I attach the original file.

thanks in advance for the advice

greetings

[rego88]

usually ecusafe on these machines is not wrong, the other day I removed a fap on a 159 year 2012 engine 2.0 136cv and it seems I still have telephoned, I have used the time, but on the new delta and the punto evo, I used es and go big!! ;)

[magi1984]

I confirm, I did a couple of 1.6 with ecusafe without problems

[msport (exil77grande)]

I confirm you can do it easily,the only thing you need to ensure is that there is the error of the 1000% of clogging of the dpf in the case, now you can see the guide that explains how to fix the thing in the area off limits.

[FidodidoTuning]

Attention perk if and version euro 5 with start and stop ecusafe or time does not work
After a bit of miles the light comes on rigenerazone in progress but not complete never...

[jolidj]

I also made the 1.6 with ecusafe , no problem.

[explode82]

made different without problems

[FidodidoTuning]

On my experiences
On bravo 1.6 mjet ok
The punto evo S&S 1.6 mjet120cv does not work,after 10 days the light on
Bravo 1.6 mjet S&S the same error
Sar? nerd I... ;-)

[coma]

You know, however, if ******* the ago'?

[magi1984]

I don't think that *******h has problems on these cars.

[explode82]

[rego88]

I have the same problem on a 159 2.0 mjet 136cv, I also opened a post.... the regenerations, I believe that I leave, because the customer says that it consumes less.... can you tell me please where is the light??? thanks a lot....

[explode82]

what do you mean light?post the file and I see that you can do

[Gianpy80]

rag? a question.. do I have to remove the fap on a delta 1.6 mjet 2008 (edc16c39 sw 1037397578) with MPPS v13.02-I read it but not being in the list of cars I read as the lancia musa 1.9 jtdm.. me read it without problems, the file I opened it with titanium and ? ok. I have also deleted the fap with ecusafe without any problems. The problem ? not using the right driver I'm afraid the rewrite.. not vrrei do damage.. did you already? done what did you use? I can rewrite it easily using the same driver that I used to read?

[Gianpy80]

I forgot... hopefully I also have the rooster but the 1.6 does not ? in the list, what would you recommend for me?

[rego88]

I have made one, but I used the magpro2.... read in 50 minutes, but it reads the whole file as if it was in the bdm... I confirm that it works luca stanca with ecusafe, but I don't know if you can rewrite it with mpps, I never tried.... there is no way to open it??

[Gianpy80]

I have made one, but I used the magpro2.... read in 50 minutes, but it reads the whole file as if it was in the bdm... I confirm that it works luca stanca with ecusafe, but I don't know if you can rewrite it with mpps, I never tried.... there is no way to open it??


I read in this discussion https://www.professionalchiptuning.net/showthread.php?671-edc-16c39&highlight=delta+1.6
that patrik has read and written with the rooster.. I could possibly use that but in the list there? therefore, risk for risk would prefer the mpps..

[explode82]

With mpps read and written with the protocol Fiat 16

[munro]

I confirm mpps reads and writes without any problems edc16...

[carlo abarth]

I confirm that on group fiat edc16 l ecusafe not miss a shot!!

[Gianpy80]

perfect.. then I proceed quietly to the writing... thank you so much, always was...

[fa2st]

I confirm that on group fiat edc16 l ecusafe not miss a shot!!

only on the motors fiat but...on the opel does not work......