PDA

View The Full Version : replacing the instrument cluster audi A4 2002


scarface
20-12-2012, 18:31
hi should I replace the instrument panel of an audi a 4 as the title there are some precautions to take??I use the vas
angel
20-12-2012, 18:50
I know that in the car on the inside of the framework, and c'? also the immo... I would like to see if it has an eeprom on the inside and the sposterei...so be quiet
scarface
20-12-2012, 19:06
The framework also includes l-immo
I opened the picture to see if c'? l eprom but there are too many, and don't recognize
angel
20-12-2012, 20:57
Look it up on ? a 8 pin signed or 93c something 24c something or 65c something...
angel
20-12-2012, 20:58
Not 65 I wanted to say 95 :-)
scarface
20-12-2012, 21:53
I found and una24c04 but ? cryptata
angel
21-12-2012, 08:28
Well you are not interested to read it if the pictures are the same just swap the eeprom...
frantik3
21-12-2012, 17:17
Well you are not interested to read it if the pictures are the same just swap the eeprom...

exact!!!!!!!!!!!!!!!!!
cicciocar
05-10-2013, 08:52
according to you just reverse it ?? try to reverse it.... and see what happens! I advise you to salvartela...
scarface
05-10-2013, 10:22
according to you just reverse it ?? try to reverse it.... and see what happens! I advise you to salvartela...

You alter the contents of the Eprom...and therefore the machine will not run on the pi?.
ecutuningpro
05-10-2013, 11:22
hello, if you need to replace the instrument panel, the first thing to do ? put it in the new mode, and then align it with the vcds. in 10 min you do everything.
cicciocar
07-10-2013, 09:07
You alter the contents of the Eprom...and therefore the machine will not run on the pi?.

finally someone who s? something>!
linus146
10-10-2013, 08:24
as it turned out the replacement operation of the framework?
the manner in which you have worked?

in fact, they were two operations that are valid............at least I think
tecnoracing
10-10-2013, 14:43
hello sorry if I'm intruding, how do you put it in the new mode ?
tecnoracing
10-10-2013, 14:44
you should not have the login
ecutuningpro
10-10-2013, 15:03
just a cable kkl and as a software vag eprom programmer
scarface
23-10-2013, 12:02
as it turned out the replacement operation of the framework?
the manner in which you have worked?

in fact, they were two operations that are valid............at least I think
at the end I l I replaced it.I have read the contents of the eprom and with the appropriate software, I have fixed the picture.
in a few words, you will lose the contents of the eprom and the picture goes crazy.
polini
14-08-2014, 14:14
with the software vag commander please log in to your old tacho and write in the new after which? go to mod the km all by obd