Before writing, and the first block =(

[tuommo89]

before reading all ok..... I'm going to write and I get stuck.....
around the framework, and not a part....? I will turn on every time the fan and various lights ,such as when I rimappava the preparer, (I forgot the mercedes clk 220 cdi - ecd16c2/3 year 2005 )

THE UNLOCK BDM , we PUT THE FILE ORI ( CONVERTED FROM FILE OBD FILE BDM, at least so I told the trainer)....THE REASSEMBLE AND.....NOTHING....DOES THE SAME THING....WHY???
WE have DONE THE BACKUP, BUT AFTER THAT we HAD UNLOCKED AND NOT BEFORE locking it!!!

SOMEONE OF YOU HAS THE BACKUP OR THE DATA ?

HELP HELP HELP
I enclose photos of the ecu!

[tuommo89]

maybe I have found the file for my ecu....can I post a link to an external site, to see if it goes well as data?

[munro]

why scream? to your house uses so?or, rather, in the house of the other screams?

[tuommo89]

excuse.... I have the habit of typing in caps ops!!! : (.... as you edit the post so the exchange?

[munro]

you can't? more change once written for my fault....so be careful what you write....you also wrote in the tread of your presentation...
p.s: for me you can also write into a giant, but the rules of a forum you read and try to respect them.....not ? a rebuke, and only a council tuommo.....

[tuommo89]

excuse.....it was not my intention to scream ....will try? remember =) ........

[munro]

anyway back to the problem of your car and the fact that with the reading bdm you'll have to reset the ecu bdm because you can not read the ecu in total(bdm) and try to rewrite it via obd in partial.....
I do not believe that it is so, because, I repeat bdm read and write all the data to the ecu for both the eprom and the e2p while in the obd read and write only the data of the eprom....

[tuommo89]

we have rewritten the ecu in the bdm by converting the file from the obd, and inserting it......but the car is not starting and mpps do not identify more! =( what do I do? I can post a link where they say they sell the backup of my drive? I found you through bosch code

[munro]

I s? you do not want to understand obd read and write only the eprom...let's say "half-unit"...the other half? that st? in the e2p does not read nor write in obd..if lai read in bdm gi? you have a full backup of the ecu but you must rewrite always in bdm.....at least for the one s? I then wait for what we say "big"......pu? maybe I'm wrong....

[angel]

Has reason munro, but I know that the first reading has made in the obd...to be able to restore the would read in the BDM complete.

[magi1984]

if you tell us the number of HW and SW can you? look for a full backup bdm...

[giarras]

he is right, our friend munro..bdm and many greetings

[tuommo89]

[elettro72]

as you said magi1984 if you tell us the number of HW and SW can you? look for a full backup bdm...

[tuommo89]

sw : 1037374194
hw : 0281012340 ( read on the ecu in the picture )

Bosch
EDC16C31

[tuommo89]

the sw l 'I took from the file .ori that I had saved on the pc !

[frantik3]

e-mail the file read in bdm and what you read on the serial line, and I will settle for I

[tuommo89]

the bed in the bdm is corrupt, not c'? l I I......c'? l has a friend of mine..... to read in serial....
for? I have the file .gold in serial and converted into bdm if you want to control it.....

[tuommo89]

Has reason munro, but I know that the first reading has made in the obd...to be able to restore the would read in the BDM complete.
the right angel....the first I made it in the obd!

[frantik3]

post and see if I can't I need the file corrupted bdm

[frantik3]

put a description of what files are

[magi1984]

I can see to recover the file but not before Monday...
online I can't find anything, and in this time the company does not c'? no one to ask for the original file.

[frantik3]

email the file to the 90% we do

[tuommo89]

post and see if I can't I need the file corrupted bdm

even if the corrupted one was not .ori ?

anyway here is the file .ori ( obd).ori bdm converted

[tuommo89]

posted = (.......save me, o my savior =) =) :cool: ihihihihihih

[frantik3]

let me know if part of it!!!!
with the one written by you started the car, or leaving only the fans?
if the part changes the preparer, the strange thing is that the number bosch does not match with the casing ecu maybe a update

[frantik3]

and then from the file bdm and flash, and his file was built turns out to be a bosch edc16c2 not 31 then you blokkata for his incompetence

[tuommo89]

let me know if part of it!!!!
with the one written by you started the car, or leaving only the fans?
if the part changes the preparer, the strange thing is that the number bosch does not match with the casing ecu maybe a update

I do not download the file!!
and the car would not start, but only the fans and the lights !!!

[frantik3]

why? you do not have 50 posts

[tuommo89]

the file .ori that was fitted at the time about ecm2001 is edc16c31 , then I do not know why? it is edc16c2 ! I as have been able to understand , I don't understand pi? much!

[frantik3]

I think that for a case of this I could help you via **** I don't think that the forum is rebelling against me your **** in pm or in the post

[magi1984]

[magi1984]

in fact, I also doing research on the san ****** with that number, HW turns out to be a EDC16C2

do you want to see that would not start the car because? the preparer (that according to me ? definitely a beginner, on the contrary perhaps he does not even trade, but only as a hobby), he used a driver ECM2001 for edc16c31 ecu, then ? calculated checksum is wrong and of course the car wouldn't start...

[msport (exil77grande)]

hi guys,today was a full day and I read it just now and everything,to try to put it back in the bike if there is a back up you can only try to reconstruct the file read in bdm even if corrupted and you also need the file that is read on the serial line,I see that, however, frantik and put to work immediately and you can not download so in these rare cases, we do not make any opposition if it continues even outside of the forum in private,let us know if you solve using the file frantik otherwise, I give a look to the file or to see if a recovery back up.

[frantik3]

ok guys , sent file and rebuilt it correctly!!!


x the Magi was not an error cecksum as on those ecu the cecksum is calculated from the interface and not by ecm2001 and definitely having used the protocol of writing and calculation algorithm, and rsa for edc16 cp31 and was blokkata!!!!

[msport (exil77grande)]

then the car lot or even to try?

[frantik3]

try Monday? but I think there are no problems writing it in the bdm then you have to see if the one who writes after everything that he's done if you are not going to lock yourself in the bathroom hhhahahhahahahha

[tuommo89]

really l I have written I the the ecu...with my mpps..... the trainer made me only the file.....and the poor fellow nn fault anything.......in fact, I tried to unlock the ecu, but without success at the first shot....Monday I try the file san frantik3 and I say to you,...... =) fingers crossed=)...... otherwise, we find the backup ori

[tuommo89]

anyway, on the program of mpps , identified the car as a mercedes clk 220 150 hp - edc16c 2/3/4 , xo in the map ori, read as a class c 220 cdi 150 ( xk clk is not carried on CMD ) put in the program ecm2001 me is how ecd16c31 , like ever? if, then, really? ? edc16c2 ? All the maps I have made have been made on the basis of them, and the machine started tranq

[tuommo89]

then if you look at the picture of the ecu sw is different as well :: 1037374194
boh mysteries of life =)

[Gerard]

if you have any problems, I have the bk full bdm of the ecu, if not Monday? made to feel that I'll send the original flash and write in the obd, for the bk complete the speech ? different, if you're not quite prepared not to put it in motion because you have to work the e2prom.

[msport (exil77grande)]

if you have any problems, I have the bk full bdm of the ecu, if not Monday? made to feel that I'll send the original flash and write in the obd, for the bk complete the speech ? different, if you're not quite prepared not to put it in motion because you have to work the e2prom.

start posting the full backup in the database and paste the link here.

[tuommo89]

not ? pi? easy to put in the bk? must be adapted to the machine?

[Gerard]

not ? pi? easy to put in the bk? must be adapted to the machine?
as I have already? mentioned above to put the bk you have to complete at least riverginare the e2prom but then you would need the Star Diagnosis mercedes or you need to supplement your in bk tomorrow poster? why? I have the workshop, so if you don't have the bdm and you don't have the knowledge on how to integrate a file inside a bk, what is pi? logic ? rewrite only the bl and leave the micro ? the e2p original (what ? better).
before writing the BL you have to make the cks

[tuommo89]

mmmmm...but it's bl and is cks....what are they? excuse my ignorance on the subject!! =) =)

[Gerard]

The BL and the Flash memory that is the one that you've read, the cks is to checksum (correct length of the file) and must be fixed before the write

[tuommo89]

vabb? but I think that my trainer knows how to calculate the cks......writing in the bdm.......boh I ? I say the same....and I hope you do not get angry! =)

[frantik3]

tried the file????

[tuommo89]

no frantik3 , doesn't it ? came in today.... =( I'm in piediiiiiiiiiiiiiiii

[frantik3]

that seriet?))))))))))))))

[tuommo89]

=( .....=(

[msport (exil77grande)]

I know that what he called the trainer will be a geek to turn.

[Gerard]

In the file attached to the original, if your friend can't even with this..............

[tuommo89]

I can not download it =(

[tuommo89]

anyway thanks a lot, but many many...***** and can the exhaust.....and I hope vadi well...... grazieeeeeeeeeeeeeeeeeeeeee

[frantik3]

excellent perfect I hope now we can!!!!!!!!!!!

[tuommo89]

but the sw : 1037374194
hw : 0281012340

? this? Bosch
EDC16c2 ?

[frantik3]

your ? edc16c2 non-c31 as the you have written with mpps edc16c2 remember !!!!!!!!!!!!!!

[tuommo89]

I tell him to put edc16c2 and not c31.....

[frantik3]

I don't know what bdm uses but make? all of the bdm to the maximum if you use a bdm clone, such as those around safe perhaps not recognize? the family, and he will have to? select it from the list bosch edc16 mercedes !!!!!!!!!!!!

[tuommo89]

refer?........anyway thanks to all those who......nice forum and awesome people!!! I hope for the best

[tuommo89]

it was not from 512kb but it was just 1 mb the corrupted file read by bdm.....

[msport (exil77grande)]

at the end, and' game or not is the machine?

[frantik3]

still not the preparer, and the fact I live and me and has it shipped to me, and the recovery I!!!!!!!!!!!

[tuommo89]

at least hopefully ahahahahah =) go frantik3

[zioweb]

but damn it, this is not you ? did ir? feel?
don't you tell us the name, but if it happens that someone nominates it, put it at least on guard in private!

[frantik3]

eh gi?!!!!!!!!!!!!!!!!!!!!

[tuommo89]

You, you , you ? made to feel on the same day., as to me, c and snow, and from him as well, and no I was going to get me to 300km of new vacuum ... I preferred it will send? to Frantik and go on the safe side instead of sending it to him , that's all!

[munro]

tuommo don't tell me that st? guy lai also paid....

[tuommo89]

tuommo don't tell me that st? guy lai also paid....

no comment.....I speak only in front of my lawyer =) :) ahahahahahaha

[frantik3]

the control unit sblokkata!!!!
initially, the bdm, I did not read gave bad blocks but then it has read and written)))))

[tuommo89]

:rolleyes:;) hopefully =) =) =)

[lucafrtdi]

tuommo89 we know .. you're the calabrian ... have you solved it?

[tuommo89]

have to get the ecu with the courier ...then I say =)

[Gerard]

But that is a fri? walking is the ecu?

[sportknight]

hahahaha,let us know as soon as possible :)

[tuommo89]

[munro]

and as v??you are satisfied with the performance?

[frantik3]

great!!!!!!!!!!!!!!!

[tuommo89]

and as v??you are satisfied with the performance?

[munro]

email the file that we were stealing the craft to frantik.....ahahahah.....no by joke....the important thing is that you have solved.....
very nice your e30 in the avatar...and your??

[tuommo89]

[munro]

beautiful E30....? a car that I liked,I like and I always enjoy?....above all, the modelo IS or M3.....maybe with 4 bbs right....and the end of the world...it seems ilk out of malice from every pore....as soon as I finish the project of my 190's definitely the next sar? on the basis of the E30..maybe I do M57 common rail...

[frantik3]

with values less increased, and the car drives better and a lot more? smooth and no smoke at the exhaust ))))))))))))))))))

[tuommo89]

with values less increased, and the car drives better and a lot more? smooth and no smoke at the exhaust ))))))))))))))))))

yes =) , we have to fix only one thing frantik..... =) ;) and then you are saying goes well

[panny200555]

Hi guys,

thank you all for your experiences and I have to say that I have realized and learned a lot!!

I wanted to ask you:

1. in case one to burn the Ecu... and did not backup your whole done previously. how to do it? you can? find a unit new/used and then copy the dump to the same unit (same Hw and Sw) ?

2. the second case: burn the ecu and there is not the ecu with the same Hw or Sw in this case what to do?

thank you for the answers

[frantik3]

everything is solved if you know how to move and what to do

[panny200555]

Thanks frantik3,

could you explain megliio... in these cases, how to proceed?

[nuovaecu]

I confirm for me, and was read in obdi you need the backup in the bdm's in the mail data of the controller, I see a bit if in my database I find it

[frantik3]

What do you mean

[frantik3]

[QUOTE=panny200555;24188]Hi guys,

thank you all for your experiences and I have to say that I have realized and learned a lot!!

I wanted to ask you:

1. in case one to burn the Ecu... and did not backup your whole done previously. how to do it? you can? find a unit new/used and then copy the dump to the same unit (same Hw and Sw) ?

2. the second case: burn the ecu and there is not the ecu with the same Hw or Sw in this case what to do?

thank you for the replies[/QUOTE

is a unit used and I have to copy the full backup or make a scodifica partial or total is dependent on the control unit and the type of car

[sportknight]

a strange curiosity?,but these are easy to block, or ? happened that broke down for other reasons? why? I never happened to the edc16c2

[beppe.c]

mail the bak bed after locking and the reading done before I see that I can do.