mpps v5 and c4 picasso 1.6 hdi fap 110cvcmp6 ; ecu bosch edc16c34

[andrew64]

hi to all I would like to ask if someone ? happened not to be able to read the ecu on a c4 picasso cmp6 1.6 hdi 110 cv fap with mmps v5 in fact, I don't do the ecu id, and the software tells me the volts are 12.5 v but it indicates that the ecu is not ? found are desperate someone can? give me info, thanks.

[frantik3]

of that year and the car

[andrew64]

sorry I forgot to write it down year: October 2007

[frantik3]

mpps v5 if I'm not mistaken the door edc16c34 k-line can-line

[andrew64]

citroen c4 picasso 1.6 hdi 110cv unit should be edc16 c34 and mpps latest version 5
every time that I do the ecu id answer me the ecu is not found

[frantik3]

but it surely doesn't see it why? your mpps does not support the can line on that protocol , the flaw in the bdm and via!!!!!!!!!!!

[andrew64]

it is the driver that is used in mpps v5 ? the k line

[andrew64]

then by your assumption I would say that mpps v5 does c4 picasso 1.6 hdi year 2007 why ? on the can line

[andrew64]

therefore, only the bdm ?

[frantik3]

It is exact not the can bus to the ecu

[andrew64]

there are no special precautions to be able to read this ecu ?

[frantik3]

If you only have one tool bdm

[msport (exil77grande)]

therefore, only the bdm ?

or different instruments.

[andrew64]

I would not open the ecu, but to tour with mpps can you read ? the pinout of the edc16c34 provides the k-line ?which pin ?

[andrew64]

to tour this unit can be done ? you lose the encoding injectors ? and with the bdm 1255 cl....I can do it or are there more problems?

[msport (exil77grande)]

to tour this unit can be done ? you lose the encoding injectors ? and with the bdm 1255 cl....I can do it or are there more problems?


in bdm, you can do it easily.

[andrew64]

ok thanks to all

[fire]

question: if you preventivamnete a full read bdm and then you try and say obd with fgtech, and you lose the encoding ineittori, rewriting everything up, and take the right coding injectors ?

[andrew64]

Exact enough, rewrite e2p bdm
If you follow the instructions of the fgtech, you should not miss coding

[fire]

I the. I followed but the car would not start... luck X scricendo the ori is game... Given what I do I read the full bdm, and then to the maximum I try obd that if something happens that makes me lose the encoding injectors, rewrite the eprom and the. I want to resume, without the use of lexia... The important thing is that you continue the encoding from bdm