Mpps reading golf 2.0 tdi 140 cv

[ct46]

Hi, I recently purchased mpps v. 12 yesterday for the first time, I wanted to try how it worked and me ? happened to have a golf 2.0 tdi 140. Cv connect the equipment I read the id of the car and then I go read the file ori and I immediately error and asks me to send the log to the manufacturer, some of you have had the same problem? I have to say that with a cock I can do it safely but I wanted to know how ever is not to be read already? misfired on the first shot ? Thanks

[speed]

Test on the other car, if that does not work defective and happened to others.

[msport (exil77grande)]

Test on the other car, if that does not work defective and happened to others.

I would say not to go straight on is not working,then what size is the file that is read with the rooster?
that protocol specific you have selected on mpps?

[giarras]

msport has the right, in the meantime, try with another car, cos? are you 100% sure its working then on the vag group ? most important, the protocol used may be from 1mb or 2mb depends on the type of ecu.

[ct46]

then the selected protocols in the mpps are (2.0 tdi bosch edc16u1 k-line), and (2.0 tdi bosch edc16u31 k-line/can) with both knew the id of the ecu but didn't read and gave me always the error log. with regard to the cock I have used I have sent the customer to Saturday pm. but I know that with what I do quietly.

[msport (exil77grande)]

then the selected protocols in the mpps are (2.0 tdi bosch edc16u1 k-line), and (2.0 tdi bosch edc16u31 k-line/can) with both knew the id of the ecu but didn't read and gave me always the error log. with regard to the cock I have used I have sent the customer to Saturday pm. but I know that with what I do quietly.


then the files have not read it yet?
possibly let us know the size when you read it.

[ct46]

Ok, I'll know

[ct46]

With mpps or did all the tests nothing, I tried to uninstall everything and re install it even with galletto 1250 (I have to say that I have done quietly on a golf 5 plus 115 hp 1.9 tdi ) I don't like the read me says to connect pin k-line. There have been bad because? I was convinced that with the cock, I could solve all and instead.... There is an interface between the pi? stable or do I have to do it for strength in the bdm? Thanks

[msport (exil77grande)]

With mpps or did all the tests nothing, I tried to uninstall everything and re install it even with galletto 1250 (I have to say that I have done quietly on a golf 5 plus 115 hp 1.9 tdi ) I don't like the read me says to connect pin k-line. There have been bad because? I was convinced that with the cock, I could solve all and instead.... There is an interface between the pi? stable or do I have to do it for strength in the bdm? Thanks

I doubt that it was a golf plus tdi 115hp maybe you meant to write 105hp,for the rest one of the best clones of the moment and' the rooster v2 that you find also in our shop on-line,however, being in your area if you need technical support can contact me in pm and we agree.

[ct46]

Ok msport many thanks, will contact you? to the pi? soon cos? we solve together, because we are in the same area .sorry for the mistake in the golf plus and 105 hp.

[ct46]

great job, very professional, I had the pleasure to meet you personally very professional, thanks msport customer happy ;)

[msport (exil77grande)]

thanks again.

[rocalci]

strange, I did a golf 5 140 hp with both cock with mpps and without problems...

[msport (exil77grande)]

strange, I did a golf 5 140 hp with both cock with mpps and without problems...

in fact, it was written, but as I suspected, it was a passat and not golf and was a siemens ppd 140cv,instead he believed bosch.

[rocalci]

ah ok unveiled the hidden mystery....

[thekid]

This passat you have made it to the end with Mpps or some other interface ???

[msport (exil77grande)]

This passat you have made it to the end with Mpps or some other interface ???

kess v2 alientech.

[thekid]

ok thanks but com mpps then I gather that it is not possible to do it???

[msport (exil77grande)]

ok thanks but com mpps then I gather that it is not possible to do it???

in theory, yes.

[marco]

sorry msport with mpps the passat you can read and write?

[msport (exil77grande)]

sorry msport with mpps the passat you can read and write?

mpps v12 reads/writes and corrects the ck automatic siemens ppd

[legendaryslave]

mpps v12 reads/writes and corrects the ck automatic siemens ppd
even if the blocchicchia a little bit, but if you insist resumes

[thekid]

even if the blocchicchia a little bit, but if you insist resumes

what would it mean??? not ? as secure as a letter\writing because I can't afford to take the risk of locking the ecu.

[legendaryslave]

the blocks 90 percent, however, raises the writing and the ripii the block ? almost safe with this programmer on this ecu

[msport (exil77grande)]

the blocks 90 percent, however, raises the writing and the ripii the block ? almost safe with this programmer on this ecu

I have had some customer that has read and written without any problems,completely unique that they have made a mess were those with earlier versions of mpps don't understand that not corregeva the ck in automatic, and then the car would not start but then rewriting the ori started.

[legendaryslave]

I, instead, more of a friend has tried to write it with the mpps, and you ? locked writing, then try again a couple of times, and you can write however the resume preticamente always
here the speech

[sno74]

And the problem is that if you say it hangs, do you take a nice nod to? if you say that at the end of the resume much better but some people say to avoid the block select the speed? slow from writing options puts us more? time but not responding.......

[panterargento]

strange, I did a golf 5 140 hp with both cock with mpps and without problems...

I have to make myself an equal, that the protocol you used?
I have these available with mpps v12:

2.0 TDI BOSCH EDC16U1 K-LINE
2.0 TDI BOSCH EDC16U31 K-LINE/CAN
2.0 TDI PD BOSCH EDC16U34 K-LINE/CAN
2.0 TDI SIEMENS PPD1.X K-LINE/CAN
2.0 TDI BOSCH EDC17CP14 K-LINE/CAN

I assume that the one that reads...writes.

[sno74]

sorry, but the protocols are not to be uploaded in case you have to put the right one otherwise you plant the machine connects and make id then post the code bosch ecu or plug in a diagnostic tool and see what port the machine.....

[panterargento]

sorry, but the protocols are not to be uploaded in case you have to put the right one otherwise you plant the machine connects and make id then post the code bosch ecu or plug in a diagnostic tool and see what port the machine.....

I have not told you upload them to the case, but the fact that if you choose a protocol that is wrong I think not face reading...and I think that what you can read, then they can write.
However, in order not to make mistakes between an hour to do the ID and the place.
Thanks sno74:)

[sno74]

best is always to read and write with the same protocol as for my advice, then maybe you have any doubts, email the number to the ecu, I say to you sure what mounts hello and good work........

[panterargento]

best is always to read and write with the same protocol as for my advice, then maybe you have any doubts, email the number to the ecu, I say to you sure what mounts hello and good work........

Here is the ID:

Vehicle Vin Number: WVWZZZ1KZ4P052319
hw 0281011843
sw 03G906016ET
System Type Number: R4 2,0L EDC 0000SG
The Ecu Found on Kline

[panterargento]

I would also serve the ori, they will have to? write with mpps12.

[sno74]

bosch 0281011843 corresponds to 16u1-5.41 but gold you need, and why? the machine ? been mapped....

[panterargento]

bosch 0281011843 corresponds to 16u1-5.41 but gold you need, and why? the machine ? been mapped....

Yes, the ori mi serves as the machine ? mapped, I looked in the files section ori, but not c'? l'843
Sorry but how do you go back to the ecu with the code that I posted? If it's not too much to ask.:cool:

[sno74]

with a program ori bosch do a thing in the mail reading and maybe you'll find something in the network....

[panterargento]

with a program ori bosch do a thing in the mail reading and maybe you'll find something in the network....

Here's the reading done with the protocol edc16u1
If you find it, consider that I have to write with mpps12:D

[FidodidoTuning]

here it is
https://www.professionalchiptuning.net/showthread.php?125-golf-5&p=23787#post23787

[panterargento]

here it is
[url]https://www.professionalchiptuning.net/showthread.php?125-golf-5&p=23787#post23787

Thanks Fidodido, always very timely.:)

Only one thing, loading it with ecm titanium, when I located the driver, it appears that they do the checksum, as ever?
I also tried to restart the sw, but nothing.
Mppsv12 which it should do automatically, right?

I'm attaching a screen.

[FidodidoTuning]

on edc16 mpps calculates automatically
titanium often has bugs, and makes such mistakes
if you want to make sure that you attach the file of the mod and the fix

[FidodidoTuning]

on my titanium works

[FidodidoTuning]

you are right not calculate,I was wrong

[panterargento]

Look at post #37 I have attached the mod file that I read:)
So much so that then the porter? all gold and make? the mod.

[panterargento]

you are right not calculate,I was wrong

I tried to open the other file de golf 5, all the same thing...
Therefore, mpps the f? in automatic?

[panterargento]

Look at post #37 I have attached the mod file that I read:)
So much so that then the porter? all gold and make? the mod.

I have to bring the whole ori......?!?!?!? start from the ori directly...I complico a life...

[FidodidoTuning]

yes,all the programmers on edc16 do it automatically
what I have to look in the mod?an opinion?

[panterargento]

yes,all the programmers on edc16 do it automatically
what I have to look in the mod?an opinion?

Then I can write...
Gi? that there 6...you...I state that does not ? 's my stuff in for me ? the whole redo.
And then, perhaps, what was I to do? I am the poster? in another section, x an opinion.
Thanks again Fido:p

[sno74]

quiet mpps calculates cks when it doesn't you remember.......

[panterargento]

Thanks guys for the help.:)

[msport (exil77grande)]

that has the mod wrong? well I would say that is not a large map, there are several things that are discordant, however, not to do damage if it were not for some casini could go, but with this I do not say that it is well made but there is worse,ps, note the injection phase.

[panterargento]

with a program ori bosch do a thing in the mail reading and maybe you'll find something in the network....

If you used to ESI Tronic Bosch as a program?

[sno74]

exact I always use that to make the checks on the ecu ? infallible....

[msport (exil77grande)]

panterargneto you read my question on the previous page?

[panterargento]

panterargneto you read my question on the previous page?

No, I'm so sorry, ? that to me also ? seemed to crash the injection phase and the turbo, however the type has not wanted to mod as the car suit him, he only wanted that the chiudessi the egr and fix the hot start.

[msport (exil77grande)]

No, I'm so sorry, ? that to me also ? seemed to crash the injection phase and the turbo, however the type has not wanted to mod as the car suit him, he only wanted that the chiudessi the egr and fix the hot start.

ah ok well then you can only quote what was written by me,then he is to decide.

[panterargento]

ah ok well then you can only quote what was written by me,then he is to decide.

Gi? I told him I still was improved...in the event you decide that you entrust them;)