Programmer for the alfa giulietta

[dvdtuning]

hi all, I wanted clarification since the giulietta is mounted with the ecu edc16c39 but apparently could not? be written with a programmantore clone type mpps , bdm or magpro2 right?

[magi1984]

for me definitely bdm do it...clone or not to clone always edc16c39 it is

[msport (exil77grande)]

for me definitely bdm do it...clone or not to clone always edc16c39 it is

if you have the magpro2 do it because the port in the list, possibly, as he told the magi, and it is edc16c39 you should be able to do in the bdm,I've made a couple but with kess v2 so I don't know the other.

[Ross]

With bdm 1255 does not enter why? has an mpc that does not ? among those present in the dll 1255.

[dvdtuning]

With bdm 1255 does not enter why? has an mpc that does not ? among those present in the dll 1255.

I have said such a thing...

[Ross]

I say that with the mpps clone do it safely....then I don't know your sources and what they say...

My speech, if you were talking to me since you have not mentioned anyone, it was based on the BDM and not on the serial port. Obviously via OBD, cutting the file to 1 mb, you can calmly write with mpps :)

[msport (exil77grande)]

My speech, if you were talking to me since you have not mentioned anyone, it was based on the BDM and not on the serial port. Obviously via OBD, cutting the file to 1 mb, you can calmly write with mpps :)


guys careful to write the wrong info,the file of the giulietta in the origin of 2m should not be cut to 1m, and write it mpps that only applies to the 1.3 mjet 75-90hp.

[Ross]

Right! The second gaffe in a few posts... it's better that I read and that's it! :D
I was reading at the same time the topic of the Muse locked and I mixed up the discussion...

[dvdtuning]

In fact, at the beginning of the post I asked of the 3 programmers which can? and what is not...I thought that the mpps could not and instead I have responded to you, the magpro2 also and bdm no. You are statti all clear, the file must be 2 mega being a edc16c39.

[virus1976]

Hello dvdtuning just tonight I read and wrote a edc16c39 of a giulietta 1.6 105hp with bdm 1255 ? all went very smooth.

[msport (exil77grande)]

specifies how the bdm.

[dvdtuning]

ok you ringranzio virus...

[marco]

hello to everyone, and then you had to disassemble the centrallina to read it in the bdm or through cable? thanks

[Ross]

BDM or Background Debug Mode ?, to put it in terms of pennies, the communication protocol that allows to read and write all (or almost, depending on the ecu), the salient parts of the controller, i.e. microprocessor, flash memory and memory e2p. All ? possible by connecting a dedicated tool, precisely BDM, of the pitches on the plate, and electronic control unit. So you have to physiologically open the same.

[marco]

thanks ross bdm I know things but I meant to say if the centrallina you had to remove physically but already you have been clear with your answer, and I wanted to know kindly because some of the scriptures you have to cut? and as you do with mpps and bdm and magpro? and the cars that you must apply this job, what are they? thanks

[Ross]

Cut the file from 2 to 1 mega is only used to be able to write with mpps on the 1.3 mjet 75 and 90 hp engine. To cut the file, you can use the ecm, by clicking on "tools" -> "conversion" > "cut/paste files" and then in the box, "the end" put 1fffff.

[msport (exil77grande)]

Cut the file from 2 to 1 mega is only used to be able to write with mpps on the 1.3 mjet 75 and 90 hp engine. To cut the file, you can use the ecm, by clicking on "tools" -> "conversion" > "cut/paste files" and then in the box, "the end" put 1fffff.

sorry, but you should correct what you have written because you have to put 0 instead of 1 and then from 1fffff to 0fffff .

[Ross]

You are right! Lately, the stress is giving me the head...

[marco]

sorry ross, your explanation is very clear pero so I do understand that you must transform from a 2-1mb to write in the obd right?

[Ross]

Only with mpps and only for that type of unit.

[Ross]

That rinco, it's I who should say so? :D

I, serves only to write, I repeat, only with mpps and only with the 1.3 multijet 75 and 90 hp engine

[marco]

sorry then you need to take it from 2mb to 1mb only for scriverla. sorry if penza that are rinco, but melopuoi safely say sara leta' haha

[marco]

then ross I understood everything thank you anyway I'm snervando but if the ecu in question is not the divide and write 2mb what happens crashes with mpps

[Ross]

To avoid blocks in the write up, just take some precautions: put a booster or battery in parallel to the battery of the machine, keep the computer connected to the power supply (obviously turned on :) ), do not move the usb cable when you are starting to write, and fallen away from the machine to prevent it moving while he writes. Finally, please :)
Joke.
The max leak with someone who has more? experience, and perhaps equipment alternative to your. Where 6?

[msport (exil77grande)]

I would like to add to the tricks of ross that you have to close all the wifi connections etc,delete screensaver and disable the antivirus.

[Ross]

Ah, also turn off the radio, climate, and any source can create power surges.

[marco]

thanks ross, I am of rome, or wrote many of the car, I mean that if I have 2mb and then I have to reduce to 1mb, this 1mb I need to write with mpps because 2mb does not write and so right.

[Ross]

yes, but this applies only to the marelli ecu for the car 1.3 75 and 90 hp.

[marco]

it is ross's ok for marelli then with ecm from 2mb to 1mb, and I am with mpps to 1mb, thanks for the patience

[Ross]

[marco]

honestly I'm aquisendo very thank you to all of the heart also because to endure a rinco like me it takes a lot of patience, thanks again.