View The Full Version : the problem with mpps v12
hello guys, today I have white hair when I saw the ecu of my car locked. I bought a mpps v12 the one with the box and for the first time today I wanted to try, I have prepared a mod file. I opened the program, set the brand of car, model and type of ecu edc 16u1 I click id all okey open file, download file, starts to do the writing very slowly (in comparison to the galletto 1260 that puts us 100 seconds) about 5 minutes for a 1 meg file, at the end of writing it, and turned on a red sash on which is written (write incomplete), or what kind of thing, I don't remember well, and the center of the program window that invites me to send a ***** the mpps. I allarmo and I try to write the original file in the recovery mode, that should be fine, I put in motion the cars, everything okey, I try again to write the old mod files. that was on the ecu before, but nothing the same message, I try in recovery mode to write the mod. already, wax, and nothing, at the end of writing I get always the same message that tells me to send a ***** the mpps. Rewrite the original file in the recovery m. pull out my old gallaccio, write the file file mod. that I had created and that I accepted the mpps and all is written correctly in only 100 seconds. Now what I ask and why the mpps writes me only the original files and the modified ones no???? I also tried to uninstall and reinstall but nothing, the problem remains. Aiutoooo
magi1984
15-11-2012, 16:24
tries to read the file that you have in the ecu and see if that does the reading.
at the end of the reading compares the size of the file to see if ? equal to the mod that you write with galletto
sorry magi1984 but if it is with gallo them to me, he writes, both the original and the modified must be of the right size has a car and a golf plus 1.9 tdi never had any problems with the old cock..
Very strange... I have a similar problem with a multijet...
dvdtuning
15-11-2012, 19:32
Solute-the mpps makes eyes closed...may be defective or it could be an error in reading the file!
Try to read with mpps and see if the file ? equal to the reading with the cock.
I don't know if it is a problem with the installation of the software, if I can say exactly how to install it, saw that on the cd I found two folders with regard to the driver that they are called device drivers, and drivers, but who are, nevertheless, already present in the program directory. I don't know how and which of the two folders I have to use to install the driver properly.....
if it was defective I had to write the original I think.
msport (exil77grande)
15-11-2012, 19:48
I agree with you it's not that it is defective it the size that it would be equal to that read from the cock but I want to tell you one thing then in the meantime I want to know if you have tried to read and in case if it went to a good end the reading and then I would like to know which protocol you read? write exactly what is written in the protocol used by mpps.
hello msport I see that you are also, as always, to help everyone. Then read that I have read since I had the file ready to download and then I downloaded quietly with the old cock. For protocol what do you mean? I have selected (1.9 TDI bosch edc16u1 Kline)
then in the recovery mode has written to me the original
are only those that were changed that I do not write, I do not know perche. boooo
dvdtuning
15-11-2012, 20:12
I don't understand if you tried to read with mpps...
franco75
15-11-2012, 20:14
It also happened to me with my ex-BMW at the first experience. I solved it by making me replace the mmps.
sorry, but the software in the top left of ec read options set to data only (default) and right or do I put it in full (Kline Only)
msport (exil77grande)
15-11-2012, 20:17
hello msport I see that you are also, as always, to help everyone. Then read that I have read since I had the file ready to download and then I downloaded quietly with the old cock. For protocol what do you mean? I have selected (1.9 TDI bosch edc16u1 Kline)
then the key thing to do if you want a minimum of security in the most and is the one to do a reading because honestly if you are not the law I write,for the protocol you meant what you wrote you and that is correct because I will explain to you wrapped these cars the law is with the protocol u1 and protocol u31-u34 but if you write with the wrong one crashes and here's how to deal:
file size 1m edc16u1
file size 2m edc16u31-u34
so if you read, for example, a file of 2m but have used the protocol edc16u1 you have to read it again with edc16u31-u34 for safety and then re-enter with that protocol, but unfortunately is not the case.
msport (exil77grande)
15-11-2012, 20:18
could you post ori and mod?
the one described by msport ? that is 100% correct
I'm sorry if I insist, but I don't see the reason to post the files seen that with the cock has me written safely. There must be another reason that I cannot understand, cannot be a problem with the installation. If I spiegi the correct procedure
file size, is the original one that modified = 1,048,576 bytes
I'm sorry if I insist, but I don't see the reason to post the files seen that with the cock has me written safely. There must be another reason that I cannot understand, cannot be a problem with the installation. If I spiegi the correct procedure
if you can read the file nn ? an installation problem, you have taken all the safety procedures? pc power and good power car? try to re-read the file with mpps and maybe post it to see if ? correct.
msport (exil77grande)
15-11-2012, 20:46
I'm sorry if I insist, but I don't see the reason to post the files seen that with the cock has me written safely. There must be another reason that I cannot understand, cannot be a problem with the installation. If I spiegi the correct procedure
honestly it is not that I care much about the changes that you made and how you made them was to see if it was' overlooked something or if it was something based on my knowledge, saw that it would not be the first time you encounter a similar thing, of course I'm not talking about you but in general,when a mail ori and mod for a problem seriousness' the map is not the comment right so if you've got secrets I can't help you a good continuation.
I don't have secrets, but I repeat, because the cock has me written without problems, the very map that the mpps does not write??? And then I don't see why I have to make public my when others do not.
if the matter is only between you and me there would be no problems, since you're always available, but I have never seen on the forum, only one map is ready to be loaded, or someone who says, now you do me. That's why I don't want to make my public....
dvdtuning
15-11-2012, 21:10
if the matter is only between you and me there would be no problems, since you're always available, but I have never seen on the forum, only one map is ready to be loaded, or someone who says, now you do me. That's why I don't want to make my public....
not ? so if you read the various discussions I have posted, I also a few files and I had positive opinions. Otherwise post it with the password and only give it to msport or to whoever you want but what? it seems that we are all here to inc.... only you.
magi1984
15-11-2012, 21:17
apart from that if you are looking for in the forum ? full of maps made by all of us and available for all...
However, see if you can do the read with mpps, if you don't do the reading to make sure even the writing!
Then you will try? to tell better what I and success, will call? mappa1 the one that was on the ecu is already modified, and mappa2 the one that was written with a negative result. Then I put it in recovery mode and I wrote the original one that I had from the time saved on the pc, and has come to a good end. Then I took the mappa1 that and what we already wax on the ecu, and even that has me written with success, I returned to the original one, and then I took the cock, and I wrote the mappa2 without problems
msport (exil77grande)
15-11-2012, 21:39
if the matter is only between you and me there would be no problems, since you're always available, but I have never seen on the forum, only one map is ready to be loaded, or someone who says, now you do me. That's why I don't want to make my public....
frankly I'm very disappointed with your response and opinion,so meanwhile, there are those who have posted in favour of the other mod files ready to upload to see chris156 to the advantage of ecuboost,then no one should expect others to file for them, if anything, can wait for advice,opinions, and explanations of various,then I do not see who is asking you a map ready for those who ask for help in this post is you,I do not think that in this forum we have never taken the distances as you are currently doing, you then don't do what you would not want that to happen,the example they have to give in the first place those who seek help and still I am in private I do nothing all that is related to the forum I do this in the light of the sun.
excuse the magi have I not said that is not the writing, in fact, that original to me, are all the ones that were changed that does not
I'm sorry, msport , maybe I exaggerated, I know that those who seek help are I, and I apologize to all those who have tried to help me on the forum, but I'm a little inca...ook I risked bad today when I saw that the car wouldn't start I and became the blood white I don't know if I explain myself since I have not yet had the problem? to buy a bdm. Me no evil in the recovery me recovery
I'm sorry, msport , maybe I exaggerated, I know that those who seek help are I, and I apologize to all those who have tried to help me on the forum, but I'm a little inca...ook I risked bad today when I saw that the car wouldn't start I and became the blood white I don't know if I explain myself since I have not yet had the problem? to buy a bdm. Me no evil in the recovery me recovery
franco75
16-11-2012, 12:33
I'm sorry, msport , maybe I exaggerated, I know that those who seek help are I, and I apologize to all those who have tried to help me on the forum, but I'm a little inca...ook I risked bad today when I saw that the car wouldn't start I and became the blood white I don't know if I explain myself since I have not yet had the problem? to buy a bdm. Me no evil in the recovery me recovery
As I understand, when ? happened to me, I had the car in the garage of a friend and with the automatic transmission in P was not put in neutral, the car locked and impossible to get out
I swear that my legs were shaking and balbettavo, then the function recovery also worked for me
Gianpy80
17-11-2012, 11:10
to me ? experienced the same thing yesterday on Audi A3 2.0 TDI, always read and written with the rooster and all ok, yesterday I read with MPPS v13.02 and ok, I'll try to write a mod that I made but I got always the 49 %... I became white.. luckily the car was a friend of mine.. Then I tried to rewrite the ori (which was always a mod that I did and loaded up with the rooster) and everything is ok.. boh.. ? the first time that happens to me.. usually the MPPS me ? always went well..
hello Gianpy, thanks to the intervention, to me it does not lock on any percentage, and at the end when it gets to 100% and writing is supposed to exit the screen that tells you to turn the ignition off for 5 seconds that I get a pane that asks you to send a ***** the mpps. All this made me only the changed files while the original with no. Now if it was an issue that modified file would mean that all of the files that I have ever written, normally with the rooster are all wrong and I should post them all as I was asked on the previous posts. I hope that a good soul I could enlighten you in this ugly story. Or how is it possible that the cyan settings to change that I don't know. Thanks for the attention, ciao to all.....
msport (exil77grande)
17-11-2012, 14:42
just yesterday evening, a contributor to the forum to which the professionalchiptuning does work and it happened the same thing on a ford focus 1.6 tdci 90cv but he was going on that he wrote it all the way to 100% then at the end gave the error,send mpps log, etc etc but the car started easily, and everything was regular 3 scriptures and everything is ok with the same error,unfortunately, we talk about clones and obviously you can't expect too much of me with kess v2 not ever, but certainly if mpps costs about 100€ and kess v2 about 5000€ a reason there is going to be.
I also do writing total, until the end 100% and then at the end I error and send ***** to mpps, but the car is not starting because they do to the locking control unit.....
explode82
19-11-2012, 08:59
don't forget that c'? an old saying that says that ? the tool that makes mast XD
Gianpy80
19-11-2012, 14:54
at this point I think it is a bug of the v12-why? with my v13.02 aside from the one time that I wrote above, I have never had any problems.
don't forget that c'? an old saying that says that ? the tool that makes mast XD
you are exactly right, but for those like me who do not ? of the trade but he does it for a hobby.. for the passion that you can't? afford to spend hundreds, if not thousands, of dollars for the interface. With clones we spend little, and if it crashes dismantle and rewrite them in the BDM. For me the machines that can't possibly make it in the bdm, I don't feel even get it with the cock with the MPPS..
at this point I think it is a bug of the v12-why? with my v13.02 aside from the one time that I wrote above, I have never had any problems.
you are exactly right, but for those like me who do not ? of the trade but he does it for a hobby.. for the passion that you can't? afford to spend hundreds, if not thousands, of dollars for the interface. With clones we spend little, and if it crashes dismantle and rewrite them in the BDM. For me the machines that can't possibly make it in the bdm, I don't feel even get it with the cock with the MPPS..
I agree fully :)
explode82
19-11-2012, 21:24
the problem ? that there are cars like the 1.6 hdi and peugeot 1.6 ford and mazda that also in bdm the resume if they lose the encoding does not take them more? even with the bdm,the us only wants the dealership or particular diagnosis.....even if part of what you said ? true
Gianpy80
20-11-2012, 07:56
sar? lucky, but 1.6 ford I have made several with the rooster and never had any problems.. the only one that to me ? locked and I had to literally change the ecu ? was a rexton 2.7... truly a lousy electronic...
explode82
20-11-2012, 20:31
I can assure you that you have been lucky,why? that type of management has a tendency to lose the coding of the variants
hi guys, as I said a long time ago, my mpps v12 does not write the changed files I do not understand why, today, not happy I tried to read the file of my car and everything went fine I tried to read the file of a peugeot 206 1.4 hdi bosch 16c34 and also here, and everything was in good order, I try to write a mod file. on the peugeot and arrived at 42%, and blocked with a request to send a ***** the mpps, write the original file in recovery mode and everything goes okey, I take my old galletto 1260 clone rewrite the modified file and everything okey. The same thing had happened on my golf edc 16u1 the file to be modified is not me that writes them (ALL of them) give me a solution I can not explain it because if he writes the original ones, not writing ones mod. I don't think it is a question of driver or program.......
msport (exil77grande)
03-12-2012, 19:26
and everything in the cable?
if so, you can take a look at the welds if it is the one with the box apart you can try to change the plug for the rest for what it costs and the risks that you corrrono better to buy a new one.
hello msport, and the one with the little box, I open it and I saw that the card inside and blue I think it is the most reliable, which plug you speak mpps and new plugs, I see four, one serial, one usb, one obd2 and the last one that I do not know what type and
Gianpy80
05-12-2012, 09:50
I think, intends to usb... if you have another try also to change the serial/obd...
sportknight
16-12-2012, 20:57
I read in another forum that the v12 ? the less-reliable version
I read in another forum that the v12 ? the less-reliable version
? the version of f? the more mess the v12 and I always f? what it says then it also depends on the invoice........
last me ? happened to a customer online, read a duchy and nn ? managed to write it.........
figure***** with the owner of the rv...............
here's what the f? the v12............
sportknight
17-12-2012, 15:39
so to confirm,I hold dear the v5 :D
Great idea if you need to make the jump to class buy fgtech
sportknight
17-12-2012, 16:54
hem,for now I use the amortized cost of the mpps of the galletto1260 and the bdm,with calm, we will do everything :D
in the meantime, perhaps seeking information about fgtech
great product nn I know that the forum but from how I read it has to work.
then I will only throw you.....
nn sell maps to $ 50 that will do only harm.
study and learn, and shoot 300€ if you kiedono a mod.
sportknight
17-12-2012, 17:20
well,for now I'll to amini trusted and relatives,the 50 euros they themselves are the ones that me asking for it,I don't want anything even why? I use them as guinea pigs for experiments
but since I like probably the most? in l? the lighthouse, a course, etc.. for now I learn from the forums,anyway we are off topic :P
virus1976
17-12-2012, 19:33
By opening a few mpps 12 I have noticed that some of the mountain as the mcu c8051f340 while others assemble mcu c8051f344, searching in the net I've found that the version c8051f340 was used up to the v5 from 6 onwards ? provided by the mcu c8051f344.
Several clones using the old mcu reprogrammed to not find an incompatibilit? between the software and the old mcu.
nuovaecu
26-01-2013, 11:37
and the size of the file, what are they??
to me, and happened more than once that hangs in writing but, again, the writing is always on the mod file and the re is' tranquillamente. I have put aside the old cock with mpps, I find it very good
sportknight
26-01-2013, 23:40
Happens to me on a 159, the modified does not take it,the original is, I have 5.....
emilground
27-01-2013, 11:02
According to me ? a problem of the interface. With the MPPS V5 clone I have read from and written to dozens of alfa, BMW, audi etc and never a problem
Do calculate the cks to the interface, and do NOT use the driver!! ;)
sportknight
30-01-2013, 15:35
The driver? Who are they? hahahah nono peaceful throughout the interface, but this 159 has some problem, anyway, welcome Everyone :)
guys I will resume this discussion in order not to open another post, I tried to read the original file for the audi q5 to my cousin with mpps v12, that does not recognize, in the list c'? only the 2.0 edc17 and the 3.0, its ? the 2.0 170cv 2011 maybe ? too recent? the one in the list ? the 140cv?
sportknight
08-05-2013, 22:48
probably ? a edc17,anyway, how much stress does the vw group
the 2000 170cv there are 3 types of units.
ok thanks sportknight, I thought it could be a problem with the interface, but up to now, has always worked out great for both reading and writing
msport (exil77grande)
08-05-2013, 23:11
instead I think that it is a siemens ppd mpps not the law,if it was edc17 could also read from, but not calcolamdo the ck in writing, you can't rewrite the mod but only the gold that has already ck calculated.
ok daniel, in fact when I click on the identification ecu, tells me the ecu is not found
explode82
09-05-2013, 00:16
that I know of after the 2009 audi 2.0 170cv does not fit the pi? siemens ppd but edc17c46 ? pi? likely that mpps will not be able to communicate with this type of ecu
On the edc17 ? not recommended to use the mpps better if you go to the rooster v2
msport (exil77grande)
10-05-2013, 09:52
On the edc17 ? not recommended to use the mpps better if you go to the rooster v2
not really, you can use mpps seen that it does not compute the ck in writing.
not really, you can use mpps seen that it does not compute the ck in writing.
And if the ck is calculated by the ecm?
msport (exil77grande)
10-05-2013, 11:49
And if the ck is calculated by the ecm?
if your ecm makes it good for you I with the official one, I can't do it the kess v2 ori.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.