Problem hand speed on upgrades, great point

[dvdtuning]

Hello, I have a dilemma for you experts:
I have a friend with a great point 2006 that has done an upgrade to the 2012 version also changing the dashboard and the instrument panel. It is not work, and the hand speed? and the distance reported by the body flash. As you can? to resolve?

[magi1984]

for the km flashing try to do with diagnostic tester, a PROXY ALIGNMENT
for the speed?, check with the diagnostic tester, if you can read the speed? of the 4 wheels

[dvdtuning]

With the edf, I know that it makes me do the alignment...I have to try

[magi1984]

I don't know, I am in company I of the motorscan and with it, the function c'?
also in the launch I am sure that c'? why? I have that as well

[dvdtuning]

I tried with multiecuscan but c'? need adapter since? the elm 327 does not connect, it should do it. C'? a wiring diagram or you have to buy adapters?

[magi1984]

I don't know those interfaces, I do not s? help you...I'm sorry

[blackwolf76]

The alignment should also do the bosch kts, a few days ago I did it on a Bravo II 2010 via the eobd port, and should theoretically be the same thing. Maybe ? for what does not work for you, not even the hand of the KM.

[dvdtuning]

I tried it with a texa but nothing to do...does not!
We have made the test hand from the diagnosis, and it works...test the speed? ok.

[blackwolf76]

You have made the test hand from diagnosis directly on the dashboard, but probably ? the rest of the system that does not ? compatible with the new equipment. For the flashing odometer could also be the airbag control unit, the radio and the air conditioning system. If you have changed any of these items you have to make the adjustment, as for the tachograph, which I repeat if you do not align, we could not verify that interfaces with the rest of the electronics, and you operate the speedo.

[dvdtuning]

? changed the entire dashboard and the car radio with one that is not original. It seems to me that the diagnosis gave some error that referred to the car radio...so in the case of the car radio how to proceed? always alignment?

[Ross]

On the cars of the Fiat group, when the odometer is flashing it means that some component is not ? aligned with the CAN system of the car. With multiecuscan you can do the alignment, important ? have a version of the elm327 at least 1.3, and the various adapters

[blackwolf76]

the alignment has to be done to the car radio original radio is not official.

[nuovaecu]

To me it happens in my Grandepunto that occasionally km start flashing and it lasts for quite a while, then returns to normal, but note that this is often what could it be?

[blackwolf76]

Any interface that does not ? aligned to the can bus of the car.

Usually may be the car, the odometer, the airbag control unit, climatronic, if it has one.

[blackwolf76]

you should check with the diagnosis what ? aligned and what's not ?...

[dvdtuning]

According to me c'? a difference of reading of the signal. I tried to make the alignment of the framework and the airbag control unit but nothing.
I think that the framework does not arrive the signal as perhaps is read from two different places... e.g. the old wiring was reading about the drivers, instead of the new currency, or vice versa...I don't know if I have explained?

[progress]

prejudice does not align because the framework tool and different and does not fit in the preparation programmed in can
I try to shoot you could reprogram the body but to be honest I've never done this type of surgery is usually the do I do I do for the original boats

[obd75]

on the point the picture is not align if the machine, for example, diesel and the framework ? of a gas(not a s? if the same thing applies for g.point), however, with a diagnosis on-board network see the units present, but not aligned or the ecus that are not present in your case the radio

another thing the total km go next? why? if the value odometrico st? working it means that the information of the speed in the komby arrives,so if the needle is not part of the probblema ? internal to the instrumentation

[dvdtuning]

on the point the picture is not align if the machine, for example, diesel and the framework ? of a gas(not a s? if the same thing applies for g.point), however, with a diagnosis on-board network see the units present, but not aligned or the ecus that are not present in your case the radio

another thing the total km go next? why? if the value odometrico st? working it means that the information of the speed in the komby arrives,so if the needle is not part of the probblema ? internal to the instrumentation

No, they are blocked, it works hand fuel, coolant temperature, rpm, turn signals, lights, everything, except for speed? and km.

[obd75]

it could be a probblema the ABS controls on the engine diagnosis if the speed? the vehicle ? pointed out,last week on a point, the customer complained that occasionally not had it speed? ne km of route, in my case I found oxide on the comb ABS,the car I handed it in to the test,for? ? the past few days and still the customer is not'? back