Kess v4.2 vs. Mpps v12

[Nightwing]

Hello guys, I wanted to kiedervi advice on which product to choose to start.
Better Kess v4.2 or the Mpps v12 ?

[sa80libero]

both are ddei good tools, it depends a bit, for example, if you write a edc17 the mag not the fa ...

[alfajtd]

as well as the mpps not the f?....

mpps is certain bmw edc16 while the mag no...

the mag is going strong on line can

[magi1984]

if you have to do mainly with your car and just choose the product best for your car.
if you're going to make a car park pi? large or if you do it for work, better to spend something more? and maybe point to a galletto v2 clone

[Nightwing]

To begin I will start studying on my own, on the ecu edc16c39 alfa 159 2.4 jtdm.

[magi1984]

for that machine mpps will be fine

[Nightwing]

perfect;)
at least I'm beginning to get an idea on the structure of the maps

[Nightwing]

can I use them safely kn windows 7 64bit or better, use the 32bit?

[magi1984]

for me ? best 32bit

[Nightwing]

ok go x the 32bit ;) so I take the opportunity to make up a nice clean reinstall.
Thanks :D

[alfajtd]

with mpps 12 do not have problems in both 32-and 64-bit.

I use W7 64-bit and I am fine with both the k-suite with the rest.

[giarras]

mpps also goes well with 64bit I personally recommend using the 32bit + stable.

[Nightwing]

another info, but to program the control units use a pc used only to this work (without too many extra programs) or a pc with which we do a little of everything?

[alfajtd]

mpps also goes well with 64bit I personally recommend using the 32bit + stable.

the kernel of W7 64bit not ? paragonaile to xp 32bit.
therefore, the stability? ? more in W7.

for some old programs that don't run on the 64bit of course you must use xp 32bit

[alfajtd]

another info, but to program the control units use a pc used only to this work (without too many extra programs) or a pc with which we do a little of everything?

only notebook used for diagnosis and programming.

[Nightwing]

anke I am inclined to this solution, it seems to me the best solution to avoid any conflicts Hw.
Thanks ;)

[19maury86]

hi raga are new...
in order not to create another new thread I join this...

momentaneamento I have a galletto 1260 and together with my friend we have changed the unit of his car opel corsa 1.3 70 hp...

now I would like to try on a 307 2000 diesel 90 hp and a ford focus 2009 1600 diesel 90hp... (already tested with galletto 1260 but I can not read them)
on the peugeot tells me to connect the pin 28 to mass and on the focus, instead, just can not read it... gets to 50% and hangs in the reading...

in addition to these cars, I would like to then put hands everywhere...

what would you recommend for me? mpps? which version? or other hardware?

[FidodidoTuning]

The cock 1260 now dated and and also risky,for example on the mjet you risked
To use type hobby you just have to mpps v. 5 or kess clone
If you want to make it even more secure and up-to-date as a list of cars better gallo v. 2

[19maury86]

could you tell me the prices ?

[19maury86]

on the mjet we have written a minimum of a dozen times... sometimes crashes the writing... but then it was enough to put her away and wrote correctly...

[msport (exil77grande)]

could you tell me the prices ?

the cock v2 can be found here as well,of course, with assistance etc.
https://www.professionalchiptuning.net/showthread.php?314-programmatori-chiptuning-obd

however, if you have to spend money with the idea of having a car park more extensive there is no better,the magpro2 from my point of view, or you take the original or no clone,mpps, but it is very limited, for example, not all of the siemens group ford-citroen-peugeot,your cock v1 tells you to ground the pin 28 because it may be a siemens and someone in the past to do this operation has also thrown the controller while for the other cars you mensionate that are edc16c34 risk of losing the encoding injectors, or even worse to find you an error, fixed that then you can just settle back in the ford.

[19maury86]

with the mpps'd be able to do the encoding of the injectors?

reading on the forum I noticed that the mpps have come to v. 15, v. 16
on the forum is selling the v12 right?
noting that you are a guru, I ask you, which version do you recommend, if applicable, for the mpps?

[19maury86]

unfortunately, I know of the cock v1... we noticed that it was fine to be able to remap the ecu of opel corsa 1.3 mjet then was fine for our purpose...

now for? we want to put the hands and understand us more and more? of these units :-)

[msport (exil77grande)]

take v12 and go quiet so you do not find substantial differences with other versions.

[19maury86]

but how do they differ? the 15 or 16 have access to the car park pi? the vast?

[msport (exil77grande)]

I know that besides the graphics, nothing changes.

[angelolsp]

I know that the v15 or v16 are chinese versions and ke does not exist in the original

[msport (exil77grande)]

I know that the v15 or v16 are chinese versions and ke does not exist in the original

the chinese if they inventanto of all, while relaunching the same product and sell it,just think of the old cock v1 12.50 and then resold as 12.60.

[angelolsp]

in fact... and then, however, c and who says that they are updated versions really but I think they are just a rip-off