mpps

[succdfrutt]

hi guys.. I am a new user and would like to get also the " I " in your world.. I almost bought a cable mpps clone online... but I think I've made my mistake big as when you attached the cable and installed the program, I practically very few cars you can manage..
? a problem of the cable to the clone or is the software not ? up-to-date? in addition, the mpps purchased was not as in the picture with the box is gray, but a simple cable... I wonder have I been cheated? in order to understand if the cable works using the other software can I make a diagnosis and perhaps try to reset the errors? or for the diagnosis I need other cables? thanks...
and sorry for the many questions but I really, really a total mess in the head.
Thanks to all....
marco.

[blackwolf76]

When one ? the novice should first of all ask questions and then make purchases. The mpps ? a good tool, even if it serves only to upload and download files from the ecu to drive certain to make a diagnosis, to do this, we need other instrumentation. Maybe you affidavi to the service of the forum and at least you had all the assistance that you require

In addition, even if ? only one cable does the same job as the one with the box, just that it is not one of those clones useless. Cars are not a few, trusted. then if you go to split for the make and model, such as by soft to see that you have a broad spectrum, is also not ? said that a car that you have not in the list not the you can do, maybe ? compatible with other cars of the same manufacturer.

[mecdoc]

as are a few?
send a screen of the list of cars that you

[rego88]

I think that is one of the interfaces with most cars on the list...

[succdfrutt]

I do not know how do I display the whole list of cars but anyway I seem to be limited... and I noticed that the version of the software ? the 5.0.1
I tried to download the mpps v12 but ask me no. hawdware etc etc... and I thought I could replace the folders of the installation with the version v. 5.0 to have the database up to date... I'm wrong?

in reference to what I was consiglato black... I have documented the evil trusting rumors.. but that cable I advice to make a diagnosis and maybe reset the codes? since I have a friend who has a workshop I can use the MAGUS of the ECM? do you know? told me I needed to make smart, but I think that it all depends on the software and not from the cable.... I don't think that for every car BMW, audi, etc etc do I need a different cable.....
Thanks again...

1634

[ecuboost]

but you can buy autocom, or then with a few euros for the elm.

[giarras]

the mpps does not diagnosis,and according to me your error is that you bought the version 5 that aim? you can not upgrade it to version 12, except if you don't change the interface,at this point you can try again to riistallare the supplied software and see if it still works otherwise ? locked.

[succdfrutt]

and then not ? only the software ? updated from 5.0 to 12.0 ? I also noticed that the software installed via the mini cd is called Multi Protocol Programming System instead of the version 12 I read your MPPS on the icon el icons are different... maybe the purchased version ? the version of tarot? I enclose a picture of the 2 icons
1636

[blackwolf76]

Between version 5 and 12, everything changes, including hardware and software. Anyway, as you said around the differences between the two versions, except for a few cars + recent, are minimal. I have a V5 and I work well, for? of course you need to use the appropriate software, the 5 in this case, that corresponds to the first icon of the image that you posted.

Uninstall it completely from your pc and remove the installation folder, then reload the software and it should work, at least not in the way you stuck trying to use a software that is not his own.

For the diagnosis, you can try the autocom, also for sale in the online shop of the forum.

[succdfrutt]

black.. if I try to start the prog. v 12 should not be' ask me no. serial cable.. etc etc... but ****llo hardware as said giarras... changing something you can do?

[blackwolf76]

you should change the chip inside, but according to me it is not worth. The software v12 not ? compatible with the V5, and it was as it says that has them both seem to have a little' + stable this last, even if I speak from hearsay, not having I had the opportunity to test.

[succdfrutt]

I understand... basically I purchased 1 year ago this cable mpps to be able to learn something, but after work I went home... now after being returned unemployed, I thought I'd pick up where I left.... but I wanted to know if with this mpps I can at least exclude the egr fap ... pretty much what I can learn with this cable and software?

[succdfrutt]

guys I uninstalled everything, and I have reinstalled the software 5.0 ... and then the pach that was on the cd.. but I get this error... ( if I install without pach I get no error ) but the pach then what's the use?
Thanks to all and sorry if they are a bit insistent....
have a good evening

1656

[giarras]

then:
your serial will never work with the software version 12,, x, be able to do you should disaldare a component and replace it, and nn is worth it because if you see in the shop of the forum costs very little.
x with respect to your how you exposed the thing I tell you now that should be the version previous to the v5,you could update with the procedure you described the pach need x to do the update to the versione5.

[blackwolf76]

In the folder of the patch should be a series of files to be copied along with the patch in the installation folder of the program.

[succdfrutt]

thanks for the replies guys.. but I still have the same error, I uninstalled, deleted everything.. open the dvd and installed before mpps and then copied to the folder on the pach..
once you apply the pach I tried to update the firmware with the cable connected.. ( cable is recognized when the pc reads it as "amt-flash"), but do not just go to a good end
what can I do? I enclose a further screen of the problem... thanks again.
Marco.
1659

I forgot in the help file.... c'? the following description:

Procedures:
1. Install MPPS V5.0.1.10
2. Run Patch MPPS V5.0.1.10 Patch
3. Put in the usb (from interface)and run FirmwareUpdate.Exe then MppsUpdate.exe
4. Finaly my interface works

[msport (exil77grande)]

thanks for the replies guys.. but I still have the same error, I uninstalled, deleted everything.. open the dvd and installed before mpps and then copied to the folder on the pach..
once you apply the pach I tried to update the firmware with the cable connected.. ( cable is recognized when the pc reads it as "amt-flash"), but do not just go to a good end
what can I do? I enclose a further screen of the problem... thanks again.
Marco.
1659



I forgot in the help file.... c'? the following description:

Procedures:
1. Install MPPS V5.0.1.10
2. Run Patch MPPS V5.0.1.10 Patch
3. Put in the usb (from interface)and run FirmwareUpdate.Exe then MppsUpdate.exe
4. Finaly my interface works



add me on skype as incuboct that as soon as we are getting and I have 5 minutes to curtain is installed, I,in the meantime, go on ****** and download and install team viewer.

[succdfrutt]

ok....done...

[giarras]

black.. if I try to start the prog. v 12 should not be' ask me no. serial cable.. etc etc... but ****llo hardware as said giarras... changing something you can do?

you should disaldare the mcu and put the one x v12 x, how much is the serial complete I think nn is worth..visit the store of the forum where you can offer the necessary assistance.

[succdfrutt]

I can unsolder the chip and solder another up-to-date? spending less?

[giarras]

I can unsolder the chip and solder another up-to-date? spending less?

sure you can, at that point there will be + problems.

[goku]

Can I take advantage of this discussion already? open mpps to ask for some info or do I need to open a new one??

[succdfrutt]

certain.....

[succdfrutt]

sure you can, at that point there will be + problems.


where can I find the chip?

[giarras]

where can I find the chip?

do a search on ****** and see what you find...

[giulianoA3]

hello, where can I find this chip?I tried it on ******but I have not found anything...thanks

[succdfrutt]

bho... I do not know

[giulianoA3]

maybe this?

[giulianoA3]

if someone can confirm, I proceed with the purchase, otherwise my mpps, I can throw it..thanks..


resp, giarras
please do not post links as required by the regulations.

[goku]

does anyone know how to launch the program mpps without having the cable plugged in..?I read somewhere that there is a file to insert ..but I can't find the source..

[giarras]

yes, it exists, but what is it for? if you want to know the car can do after the place..I remember that x download you have to have the famous 50 mess.useful continues to participate actively.

[goku]

in reality, I wanted to re-open the saved maps with mpps to recoperare number of hardware and software..I don't know if you can do in reality..

[giarras]

I would not like to be wrong, but mpps does not save the downloaded files, but possibly x open the sofw. just put it in the usb

[goku]

..the file is saved in the pc..the riaprirei as if I wanted to transfer it to the ecu..it was just a convenience for not having another cable on the legs(I have a small child and I find the time for the pc when he is sleeping and on the bed with the laptop less cable I have the better..:rolleyes:

[succdfrutt]

I x what I understand serves both the cable and the software allows to load and save the data from the ecu.

[goku]

Has anyone tried to update the software version v15?

[blackwolf76]

In my mpps5 you don't need a cable to upload the files into the soft to read the data.

[goku]

The v12 if not connected(not to include the famous plugin) does not open without the cable..

[blackwolf76]

The v12 if not connected(not to include the famous plugin) does not open without the cable..

in this case, then, you may use the V5 to do what you need:rolleyes: