egr focus cmax

[max75]

hi to all you know give me some advice for the deletion of egr on ford focus-Cmax . 2000TDCI ... year 2004 I have mpps and BDM.....

[max75]

with mpps can't identify ......tomorrow, would the data on the ecu....

[msport (exil77grande)]

the ford focus c-max 2.0 tdci if the 115hp is mounted on a delphi and would it not be easier to delete the egr if it's the 136cv is mounted on a siemens sid 803 and sid 803a in which you could eliminate the egr,but in all three cases, you can't do it with mpps, but with the bdm.

[max75]

yesterday, I cleaned the egr the car was not so good, in fact, the valve was open ? totally dirty, did this to me, you turn the light... in diagnosis ? the 2% fixed.....the engine ? 200tdci 136 hp and then only in the bdm...***** and how do I do a bachup.....c? something about to know...? the first that happens to me...

[max75]

I take advantage of it in the message to tell you that I can't use ecm asks me for the pass

[msport (exil77grande)]

I take advantage of it in the message to tell you that I can't use ecm asks me for the pass

for that please contact me in pm and explain to me.

[msport (exil77grande)]

yesterday, I cleaned the egr the car was not so good, in fact, the valve was open ? totally dirty, did this to me, you turn the light... in diagnosis ? the 2% fixed.....the engine ? 200tdci 136 hp and then only in the bdm...***** and how do I do a bachup.....c? something about to know...? the first that happens to me...


in your case only bdm for the rest, we have a guide to exclude the egr in the appropriate section.

[max75]

thanks as soon as possible and give it a look.....

[max75]

I solved it ...as I had time to delete it ....I bought it new €90,00 modest price...

[max75]

then sincerely on this car I still don't understand it.....

[perrysound70]

to exclude it on the 1600 year 2008 90hp I tried with 1.2 but not me take it off,while on the bmw 120d there I was successful..***** and I have to do?

[Errecinque]

to exclude it on the 1600 year 2008 90hp I tried with 1.2 but not me take it off,while on the bmw 120d there I was successful..***** and I have to do?

You have to least post the file ori and say that the ecu is because someone can help you

[perrysound70]

I don't know if I can post..new entry

[Errecinque]

I don't know if I can post..new entry

You can't download, but you can upload your files, the ori possibly enter it also in the database, the original files if not there already

[perrysound70]

ok..I will

[perrysound70]

I put the file .ori and the files made with 1.2,the ecu is bosch edc16c34/2.20 SW 1037393199
But I don't understand why it has not worked and you turn the light.Consider that the ecu has already been changed 2 years ago and I can not get the driver with the ECM to understand something and open the maps and see what they did compared to the original.In fact, I would like to spremerla more.

[perrysound70]

without cerina are outputs after 2010 and then it does not fap, but only the catalyst.With regards to remove the dtc I have to figure out what software will I need, I don't think I will suffice it to Ecm.

[perrysound70]

I remedied the file .ori and corresponds to that of the focus!!! I was able to work with it and goes much better the car