first steps on the ecm

[giobarbone]

hi guys sn was able to recover a file golds and a diver x try the program...
but I can make it go...
oxy load everything as it says in the manual... that is, before the file ori and then the driver , should be out next changes to the sessions injection and trubo...
but nothing...
help

[bart]

Hello giobarbone,
You should first locate the drivers with the same number of HW and SW of your unit, select and open them!
Then select the file ori and the open and at the top you should see the drop-down menu: injection, turbo and limiters!
If not, first select the correct driver, you will never be the menu that you are looking for... ;)
What is written above refers to the 2001 version, but for the tytanium ? similar to... You which version you have?

[giobarbone]

I have the 2001...
the file and the drive sn-compatible, I checked the numbers...
driver A988_042.DRV
file ori 042_988ori
or am I wrong?

[giobarbone]

then I have to prove I still have something wrong..
xke I get a sign that I need to encode in edc16 ie??

[giobarbone]

okok...then those messages are of little use?

[rego88]

fermi fermi.... someone in here can't remember how to use ecm 2001
you have to open the file ori... look at the info on the right what you say, what? that the real numbers come out.... after that... select the correct driver hypothesis if right on the 2 white columns, it leaves you to guess 0281001345 and under 9876543215 you will need to look for a driver 345_215 knowing, however, that the car we are talking about.... if instead the gold that you are using ? a jtd fiat edc16 you will find the column of the right edc16c39 or edc16A0 2345678909 and just... you know you're a sw 909 and ammattisciti to look for assumptions between the drivers of 147 something that has three numbers and initials after the trattino_909. select the driver and then loads the file ori.... if the driver ? correct... at the top after the written files, etc... go out,' injection, turbo limiters if you are not out anything about the driver nn ? correct.... I hope I was helpful!!

[giobarbone]

so if I understand well I have to see the last 3 numbers of the file ori and find it in the driver??

[rego88]

very good.... you have to see the last 3 numbers of both the hw and the sw... if we talk about edc15 and some edc16.... the first one that you find ? always hw and the second sw.... if there is one, only.... they always talk about the sw.... on the driver.... the first ? always hw and the second sw

[giobarbone]

nn if I find anything? the driver nn okay??

[mecdoc]

see if this you can? be useful

[giobarbone]

I can see no I have the 50 mess :-(

[mecdoc]

true, I hadn't made the case

[giobarbone]

nn you can explain in words??

[Team electronics]

by it's very easy!!! you have given an explanation quite exhaustive and try again!!!

[giobarbone]

I did it...I was that I couldn't...
now comes the fun part...then following the manual of the program says to do
- Select the cells from 700 to 4500 RPM, and from 40% to 100% of LOAD.
- Increase of two points.
- Select the cells from 700 to 4500 RPM, and from 45% to 100% LOAD.
- Increase of two points.
- Select the cells from 700 to 4500 RPM, and from 50% to 100% of LOAD.
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 55% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 65% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 70% to 100% of LOAD.
- Increase of two points.
- Select the cells from 700 to 4500 RPM, and from 75% to 100% LOAD.
- Increase of two points.
- Select the cells from 700 to 4500 RPM, and from 80% to 100% LOAD.
Ecm2001 from a To Z - v1.0 - Page 14
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 85% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 90% to 100% of LOAD.
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 95% to 100% of LOAD.
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 100% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 80% to 100% LOAD.
- Increase of two points.
- Select the cells from 700 to 3900 RPM, and from 75% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 3300 RPM, and from 70% to 100% of LOAD.
- Increment of a point.
- Select the cells from 700 to 2800 RPM and from 65% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 2400 RPM, and from 60% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 2100 RPM and from 55% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 1800 RPM, and from 50% to 100% of LOAD.
- Increase of two points.
- Select the cells from 700 to 1300 RPM, and from 45% to 100% LOAD.
- Increase of two points.
- Select the cells from 700 to 1000 RPM, and from 40% to 100% of LOAD.
- Increase of two points.
- Select the cells from 700 to 1000 RPM, and from 50% to 100% of LOAD.
- Increase of two points.
- Select the cells from 700 to 800 RPM, and from 60% to 100% LOAD.
- Increase of two points.
- Select the cells from 700 to 1100 RPM, and from 80% to 100% LOAD.
- Increase of two points.
? right??
works of sn other methods?

[msport (exil77grande)]

make a map with this guide, and not just try the machine go straight to the old iron haahha,try and mail you will see that mostruosita'.

[giobarbone]

and then cm do??anyway, to the max sn 14 points

[giobarbone]

anyway, I did just copy and paste from the pdf of the manual here

[msport (exil77grande)]

I'm sorry, but you ask an on-line course explained on the forum,begins to take a cue from what was done on your own and talk about the map for the map.

[giobarbone]

then you ask me to do simulations and post them??
I want to learn before making a mess

[msport (exil77grande)]

then you ask me to do simulations and post them??
I want to learn before making a mess

certain make of the simulations and post, then we can give you advice and opinions, step by step, but to do a course on the forum seems excessive to me,it is right that before you practice to not make a mess and then when you have a basic experiment we are here for this, but one thing at a time and in no hurry,what car do you own?

[giobarbone]

I no I no mapping done...I just want to learn

[msport (exil77grande)]

I no I no mapping done...I just want to learn

ok,if you don't have a base searched a ori and mod that could be go well with the studies and try to do the same things then we'll tell you if you have done well, or if you have done wrong and where.

[giobarbone]

I am now in the program I only have an ecu of an alfa 2.4 mjtd... and the suitable driver...
xo I want to learn to do more or less a thing feasible x all the cars...and x to do the simulation, I was following the manual...
xo I ? was written so that cm it says in the manual to the machine I put it in the old irons...

[giobarbone]

com let us to post to the various files?

[giobarbone]

1537

see the file?

[bart]

Hello giobarbone, I hope that my previous message, you have not offended: it was simply a joke... ;)

Your attachment does not see...
To attach you have to choose to respond at a moment's notice? advanced.
Then click on manage attachments
from the drop down menu selections: add file
then: select the file (the one that you want to load saved on your pc)
And then drag and drop the file in the lower part of the window...
And at this point it will be? attached to your message...

[giobarbone]

no one has given an eye to the file??

[giobarbone]

? a 156 2.4 mjtd EDC16C8/ 1037372042
need more?

[msport (exil77grande)]

discussion cleaned up from all that is not inherent in the title,please do lessons on the operation of the engine in a specific post, who knows if I learn something as well I hehehe.

[giobarbone]

okok then I'll just redo it and put

[giobarbone]

it's better now?

[msport (exil77grande)]

so much for teaching would be correct from my point of view, name it like this:

marca_modello_cc_cv_hw_sw_ecu.ori or the mod

alfa_156_2.4mjet_175cv_988_042_boschedc16c8.ori

[giobarbone]

I have to change the name??

[giobarbone]

I have changed everything I said to the cio's guide? turbo injection choked (which I don't know what it refers to) and torque limiter
then I ? released over boost nn I touched it and other types of limiters and caverns of injection types that I've touched

[megamind]

Hi all I'm also studying and I take this opportunity to ask if you know why there are three tables with different values for the pressure turbo?
The unit in question ? a edc16c31. I enclose the three tables.

[megamind]

With the usual problems of ecm :confused:...I have a map that ecm called map2 boostxrpm seen that I don't trust much I'm asking for your opinion,
the address ? dc228.
Give me a hand as to call it? The bp. rpm up to 5000 mm3 and diesel up to 75.
Should be early, but I'm not convinced. Conversion factor may be 0,023437 if in advance you speak.
There are 3 maps 16x16.
The map1 boostxrpm ? definitely early, but there are 5 tables 16x16.
How do I know with certainty that this map 2 this is in advance?
C'? a test that I can make it through the log of the diagnosis?


Thanks

[megamind]

megamind the images that you attached are not to be case sensitive, you see a praiseworthy......
it is very difficult to help you cos? also for the more experienced than me.....

Perhaps the forum down, I try to attach a compressed file. I can't see them, why? are not enabled, then no I realize that.

[msport (exil77grande)]

mega upload images on an external server ? then the seats....
why me's? you post pictures like you do ? prohibited....

no not prohibited, however, because they are as attachments, and those who do not have 50 posts does not see them, however, if they are loaded on the external link can see them.

[megamind]

So I can't see the attachments in the rar or are too small?

[marco]

hi everyone, new to the forum. I wanted to know kindly smoothing on ecm2001 ignezioneparzializzato means that touch the amount of diesel fuel? shot zoned map1 want to say laira that I introduce and map 2 the air that comes out and so that it works. and another thing to kindly if someone can help me I have as a guinea pig alfa 159 jtd 150hp as that by or. and' a little dead under by force what percentage I have to work to give to him a few horses. thanks

[msport (exil77grande)]

hi everyone, new to the forum. I wanted to know kindly smoothing on ecm2001 ignezioneparzializzato means that touch the amount of diesel fuel? shot zoned map1 want to say laira that I introduce and map 2 the air that comes out and so that it works. and another thing to kindly if someone can help me I have as a guinea pig alfa 159 jtd 150hp as that by or. and' a little dead under by force what percentage I have to work to give to him a few horses. thanks

hello,I invite you to:
-read the rules
-introduce yourself in the appropriate section
-after you have done that, open a specific post to your problems and ask for help them
-if you want some advice a good post ori and mod always in the suitable section and we'll give you some advice otherwise you can contact the online service of the forum
good continuation.

[marco]

ok thanks for the pecisazione

[marco]

------------------------------

[msport (exil77grande)]

maybe I was not clear enough,just above I clearly wrote that:
if you want some advice mail ori and mod always in the suitable section and open one of your posts without polluting other and we give you some advice otherwise you can contact the online service of the forum,I hope I was more clear this time.
------------------------------

[marco]

but if you do not find the three numbers the same I suggest you to try the ones that are and surely you will open the ecu.