raffaele25

Hi guys does anyone know how to unlock the butterfly valve on the mito 1.4 78cv? I know that has been weakened from 95 to 78 for new drivers...someone could help me?

ugoboss

you could say to post the file that I try to help, but then you wouldn't be able in any case to see or download the file.

raffaele25

hello, I am attaching the same file maybe seeing him will you please tell me at least if you managed to unlock this butterfly or not

cinqueturbo

But we didn't have the palate the same topic and the same identical File that is already in another Post??

I ask because I have a project already loaded with butterfly unlocked with HW 0261S04407 SW1037399991

Never Tested...

raffaele25

You can passarmelo in some way so the text I?

cinqueturbo

29-03-2017, 21:48

You can passarmelo in some way so the text I?

lightning

but the limitation, and only on the restriction of the butterfly,or even on other parts of the map?this limitation can also lead to problems of supply ,type, starting from a standstill tends to go off?

raffaele25

But sure it is them? because it is not the turbobenzina but the 1.4 16-valve 78cv aspirated

raffaele25

but the limitation, and only on the restriction of the butterfly,or even on other parts of the map?this limitation can also lead to problems of supply ,type, starting from a standstill tends to go off?

No no problem only the car is quite dead..anyway that I know of and only a limitation on the butterfly

raffaele25

I have read all and 2, but I have not found anything that went well with the 1.4 naturally aspirated

raffaele25

I have tried to modify the file read from the ecu by cutting and then merging it...write it on the ecu is 100% error...the machine will not start. If I put back the original, I have no problem as ever?

cinqueturbo

I have read all and 2, but I have not found anything that went well with the 1.4 naturally aspirated

There is there is it just that you can not download attachments or see images..
wait, so the other bit and read the various posts to find you forward while you hit the skill..

cinqueturbo

I have tried to modify the file read from the ecu by cutting and then merging it...write it on the ecu is 100% error...the machine will not start. If I put back the original, I have no problem as ever?

How do we know what are you doing?
I can only assume that you have not cut re-united modato the file correctly or the tool does not correct the checksum boo..
attach the file..

raffaele25

How do we know what are you doing?
I can only assume that you have not cut re-united modato the file correctly or the tool does not correct the checksum boo..
attach the file..

Here are the 2 files one original and the other modified...I have read and scrvere I used galletto v54

dragusdrake

as you may have made to attach files? :confused:
however, those discussions there is the solution to your problem on the release of the butterfly, no matter who your is or less turbobenzina

raffaele25

I gave a reading, but I did not understand much since I can download anything

cinqueturbo

Here are the 2 files one original and the other modified...I have read and scrvere I used galletto v54

as I have time to do one-of-line..

as you may have made to attach files? :confused:
however, those discussions there is the solution to your problem on the release of the butterfly, no matter who your is or less turbobenzina

Can attach but not download..

cinqueturbo

I have tried to modify the file read from the ecu by cutting and then merging it...write it on the ecu is 100% error...the machine will not start. If I put back the original, I have no problem as ever?

As I thought you made some error in the paste the file..

besides that the mod that you made are without logic...

a council please contact the Professionalchiptuning that with a little will give you the maximum.

raffaele25

As I thought you made some error in the paste the file..

besides that the mod that you made are without logic...

a council please contact the Professionalchiptuning that with a little will give you the maximum.

But, in fact, was something done to the eye just to try if the file was leto from the ecu... anyway tell me how I have to combine the two files once cut?
or maybe write me the address of the curves of the butterfly forever if you can and want

lightning

hello when editing the file should be also removed the butterfly in the manifold?