Actros

Hello guys, I have a problem with my Point. I have lost the card code and I have only one key. I would like to duplicate a second key tool SBB but I need the pin code. Can someone tell me in details how to do it? What you need to be able to obtain the pin code 2 and with which tools or programs? I have the galletto v54 but I am a beginner and I don't know where to start. Thank you in advance 👍👍😉.

glittering chiffon party dress.fitted

In the trade there are tools that will read in serial e2p 93lc66b present in bodi ,otherwise with the programmer upa or similar dissaldandola you can read, and with a small program, or another tool that allows you to program the other key to finish the job by obtaining the pin code that you need to diagnosed with dedicated to activate the new key

Actros

Thanks glittering chiffon party dress.fitted, I have SBB programmer key. I read the immobilizer but does not tell me the pin code 2. Could you tell me which tool via the serial can read this type of code? Am beginner and I don't want to take the risk for now to unsolder the memory from the body to read it, because I don't have the tools. Let's talk about code 2, if you Know what kind of tool reads from the serial port with the certainty I would be grateful.

glittering chiffon party dress.fitted

Thanks glittering chiffon party dress.fitted, I have SBB programmer key. I read the immobilizer but does not tell me the pin code 2. Could you tell me which tool via the serial can read this type of code? Am beginner and I don't want to take the risk for now to unsolder the memory from the body to read it, because I don't have the tools. Let's talk about code 2, if you Know what kind of tool reads from the serial port with the certainty I would be grateful.
IoTerminal ,zedbull last generation , FVDI Abrites and other ,otherwise get a upa, station dissaldante hot air, read the file of the seats and you get the pin code.

Actros

Thank you, I will try and I'll let you know.

Actros

Hello glittering chiffon party dress.fitted, excuse my inexperience but I am going to buy the zed-bull as recommended by you. I just want to know if I know how it works. I mean, I read the immobilizer via the serial connection or do I need to read the code of the key? How do I make the file that I send you? Thanks in advance.

glittering chiffon party dress.fitted

Hello glittering chiffon party dress.fitted, excuse my inexperience but I am going to buy the zed-bull as recommended by you. I just want to know if I know how it works. I mean, I read the immobilizer via the serial connection or do I need to read the code of the key? How do I make the file that I send you? Thanks in advance.
Can I ask what work you do? you are a repairer or a private? I ask you, why buy a zedbull ori has a nice cost,personally, some years ago, stimulated by the do something different from my work, I purchased the zedbull chinese, but in addition to the programming of some transponder for fiat id 48, no I have not pushed over, it is a work this play keys very expensive if you equipment with an original equipment ,but moreover, you have to learn to solder, no equipment can guarantee to read everything then you have to in the meantime, buy a station dissaldante hot air, a good programmer and a lot of patience to deal with the work that you propose.

glittering chiffon party dress.fitted

I add: but if the problem is only to know which is the pin of your car is more economical than go in fiat and buy the pin card.

Actros

Hello, I was a mechanic but now I do anything but work. I have always been passionate about the part we say electronic. I wanted to experiment and learn because now that I have the time ******. But I didn't think it was so complicated to have to duplicate a key, I thought, sincerely, that there were readers via serial but I'm discovering that it is not so simple. I wanted to buy the zed-bull chinese too, but I know that I do not Go away. I already have The SBB and the galletto v54 becoming clones.

glittering chiffon party dress.fitted

Hello, I was a mechanic but now I do anything but work. I have always been passionate about the part we say electronic. I wanted to experiment and learn because now that I have the time ******. But I didn't think it was so complicated to have to duplicate a key, I thought, sincerely, that there were readers via serial but I'm discovering that it is not so simple. I wanted to buy the zed-bull chinese too, but I know that I do not Go away. I already have The SBB and the galletto v54 becoming clones.
I don't want to be discouraged if you say these words, try to understand that if you don't have the basics of this type of work becomes even more difficult. Now I'll explain what to do to reschedule in this case a key code 2 with zedbull china of your car:
However, you must have at least one programmer upa,a station dissaldante hot air because the zedbull china will not read the bodi in serial, remove the bodi from the car, open it up, desolder the e2p 93lc66b that maintains data queues, read it with upa, get the pin code which you will need later with diagnosis tool to register the new key ,save the file (you CAN ALSO WITH OTHER SOFTWARE) get the pin code ,then key to be programmed, insert it in the accommodation, open the file read with upa, key program, add key, save the new file that you will need to write in the e2p that you have unsoldered.This is done risaldi the e2p re-mounting everything,colleagues station diagnostics enabled the registration key, enter your pin and the car restarts easily.
Don't you think it is more simple to go in the hall and order the pincard? hello good work.

Actros

Hello, I understand that without the foundation is difficult. You have been clear enough. Thank YOU so much for Your availability. See you soon.