Makx
Hello to all
I have tried reading the counter of the sirius 32N (originally fitted on renault Twingo) with kess v2 clone V2.22 firmware 4.036.
I used the pin out with a pin 29 and 30 to +12V / 3 ground / 26 k / 56 can line (the yellow wire of the cable Kess with wiring 2 pin +3 pin) , I attempted to send it in boot mode but nothing, always error alarm signal as a final result.
I powered up with the pins 29 and 30 (without simulation + under the framework).
some of you managed to read it from the bench with Kess clone... I would like to understand the reliability of my instrument
thanks in advance
I have tried reading the counter of the sirius 32N (originally fitted on renault Twingo) with kess v2 clone V2.22 firmware 4.036.
I used the pin out with a pin 29 and 30 to +12V / 3 ground / 26 k / 56 can line (the yellow wire of the cable Kess with wiring 2 pin +3 pin) , I attempted to send it in boot mode but nothing, always error alarm signal as a final result.
I powered up with the pins 29 and 30 (without simulation + under the framework).
some of you managed to read it from the bench with Kess clone... I would like to understand the reliability of my instrument
thanks in advance