View The Full Version : 1 map 1.3 mjt opel corsa c 69 hp
Good evening I would like to begin to change The parameters manually....I read in some threads that I should gradually increase the 2 injections from 8 to 15%....then give a 10% torque limiters torque starting from 1,200 rpm to about up to the max. What do you think?
good evening, if you want my advice do not think that it is so easy because it is very complicated ...
so according to me you can do the tests, post the files and the guys to check but always, I repeat is not simple .. there are so many of those things that not enough of the discussions in the forum .... you have to study to understand the meaning of a map to know all that touch ... knowing how to recognize the maps in 2 D ...
an example : injection wound if you increase you believe is increasing diesel instead of the smagrisci because you have to decrease, and then the risk of breaking the pistons believe me, I made a course if you are a novice ...
except that you have a guinea pig then try ... until you understand... have a good evening ...
entrusted to the experts!!!
Certain that before writing the map, I check it by some expert. Then if you want to give me a tip let me have it otherwise you are not obliged to respond.
Aimed at carfree.
Aimed at carfree.
Dear ... I knew you would have offesso but I gave a tip, saying only that in the maps there are a lot of things.in the forum you can not learn then we would here help you obvious hello
Here You have all read and study and then if you make the questions more targeted and sensible, you will find answers.
Thanks r5...no I was not offended car free but I'm here to learn not to hear controversies...***** s, up to 1 wk ago, I knew nothing of this world. Now I read I write the cut file comparison maps I begin to recognize differences .... you know I'm a body shop become mechanical and electrical repair shop. the drive I have on hand...I'm 22 years for me is a passion...
One step at a time.
A handful at a time.
One round at a time.
Unfortunately, it is not easy to Map, if you do not pass the years in order to have experiences you will never understand..
as they say, the guys above you have to study a lot and study the create only with the years in the forums you will only find Comparisons and Tips, etc etc But the study you need to creartelo you!!!
I'll give you a tip, at least for the first map leak, make by an expert of the trade, so you go to see increases in what is moved and where, and begin to understand something, so you have a base for the next map, and why not if you happen to have the same car you do two birds with one stone.. Trusted
well dettoo.
listen I wanted to ask you something, but like you have to do to download files?
if I'm not mistaken you were in my same situation some time ago, is it true?
well dettoo.
listen I wanted to ask you something, but like you have to do to download files?
if I'm not mistaken you were in my same situation some time ago, is it true?
Simply have 80 msg useful to the forum (not spam)
I have a map made. ..it's just that it makes me open The driver. ...you know the perk?
I have a map made. ..it's just that it makes me open The driver. ...you know the perk?
to see what has been done to your map you have to put the file ori and mod the only way you'll open up the driver and see the differences if you have the driver.
You've done so, and in 2d I can see the differences....but it seems to me that the drivers for The map mod I do not see....tomorrow I'm losing time
Before the file ori so you can find the driver and after I put the mod but where is it written modified file
You maybe uploaded it to the place of the ori so I will find the driver. Attention
okay thanks mill errecinquecento.
Shiston I did as you said but I have written no drivers compatible with the selected file
Ahhh ok....just select both and enter with the original driver....now I see the differences
boys to bring a file from 1 meg to 2 what is the process?
boys to bring a file from 1 meg to 2 what is the process?
in this discussion, we speak of a thing then remain in the theme,for the rest using the "search" button you can find a lot of interesting things.
Shiston I did as you said but I have written no drivers compatible with the selected file
Ahhh ok....just select both and enter with the original driver....now I see the differences
well I'm glad that you did
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.