per lucagt il programma che mi hai allegato non me lo lascia scaricare dice che pu? essere dannoso l'id del cavo non so come si vede (probabilmente con il tuo programma ), per caricare l'immagine da un'altra parte non sono pratico ,provo a scriverlo qu?
interface status=-2
interface not ready!
possible reasons:
*incorrect port com selected
*interface not plugged in
*ignition not turned on
*k-line stuck
*firmware update needded

for more details,use test on options screen

nel cd che mi hanno mandato c'era anche un file di testo copio qu? il contenuto ||VCDS v11.11 ATMEGA162 Fuses & Lock bits
---------------------------------------

# LOCK: 0b11111100
# bit 7 = -
# bit 6 = -
# bit 5 = BLB12 (1)
# bit 4 = BLB11 (1)
# bit 3 = BLB02 (1)
# bit 2 = BLB01 (1)
# bit 1 = LB2 (0)
# bit 0 = LB1 (0)

# EFUSE: 0b11111001
# bit 7 = -
# bit 6 = -
# bit 5 = -
# bit 4 = M161C (1)
# bit 3 = BODLEVEL2 (1)
# bit 2 = BODLEVEL1 (0)
# bit 1 = BODLEVEL0 (0)
# bit 0 = -

# LFUSE: 0b11111101
# bit 7 = CKDIV8 (1)
# bit 6 = CKOUT (1)
# bit 5..4 = SUT1:0 (11)
# bit 3..0 = CKSEL3:0 (1101)

# HFUSE: 0b11011100
# bit 7 = OCDEN (1)
# bit 6 = JTAGEN (1)
# bit 5 = SPIEN (0)
# bit 4 = WDTON (1)
# bit 3 = EESAVE (1)
# bit 2 = BOOTSZ1 (1)
# bit 1 = BOOTSZ0 (0)
# bit 0 = BOOTRST (0)

non so a cosa pu? servire questo file di testo, il cavo ? installato in xp virtuale che gira su vmware, a dimenticavo il test usb risulta ok dove c'? scritto led se clicco dopo un p? dice ok in gestione periferiche viene visto come ross-tech, non si ? mai collegato a internet, ciao se sai qualche dritta ----- grazie