Cantiecar v4

[ciccio84]

Salve amici ho acquistato il cantiecar con multiecuscan,dalle info vedo che è in grado di emulare altre interfaccie!
Qualcuno di voi lo conosce?

[ciccio84]

Amici nessuno usa il cantiecar?

[ugoboss]

credo ti convenga chiedere a chi te lo ha venduto.

[carlo abarth]

che tipo di programmmi supporta??

[ciccio84]

Ho preso tutta la specifica Carlo eccola;
Hardware
- Powerful ARM-core MCU
- Bluetooth v2.0 + EDR Bluetooth ready
- True USB-ready device: CDC, FT232B/R-emulation, FT2232C-emulation, MSD over SD Card
- SD Card: internal Flash storage with USB-MSD up to 32GB
- 3 independent ISO9141/ISO14239 K-Lines (ISO-Lines): OBDII-pins 7,8,15
- 2 multi-functional lines (MFLs): CAN - one and two-wires, K Lines, J1850, DC-DC-out (5-30V)/1W etc.
- built-in solid state relays multiplexer for OBDII-pins 1,2,3,6,8,13 and 8,9,10,11,12,14
- built-in hardware UART multiplexer
- built-in switchable CAN-bus differential terminator 120 Ohm
- 11 Leds: 6 - Bus Activity, 1 - USB/Bluetooth TX Activity, 1 bi-color - Power state: USB and car + USB Activity, 1 - Bluetooth Status/Activity, 2 - Status
- 2 DC-DC: 5V/500mA and programmable (5-28V)/1W
- 8 ADC Channels: Power ISO-Lines, Power MFL, High MFL, Low MFL, OBD:1, OBD:8, OBD:9, OBD:16
- Systems: Up to 32V
- Speed: ISO-Lines up to 500kbit/s; CAN up to 1Mbit/s
- Special OBDII-connector design
- Security Firmware updates
- ALL protections with Resetable fuses
- Support additional equipment for cars

Emulated well-known adapters
- USB-Serial (4/5:GND, 6:CTS, 7:RXD, 8TR/DSR, 14:RTS, 15:TXD)
- USB-Serial Inverted (4/5:GND, 6:~CTS, 7:~RXD, 8:~DTR/~DSR, 14:~RTS, 15:~TXD)
- K-Line + USB-Serial LPG/CNG (4/5:GND, 12:RX/L, 13:TX/K, 7:K)
- KL-Line (7:K, 15:L)
- 2K-Line (7:K, 15:K2)
- KKL-Line (7:K, 15:L/K2)
- 3K-Line (7:K, 15:K2, 8:K3)
- OPEL 4K-Line (7:K, 8:K3, 3:K4, 12:K5)
- Multiplexed K-Line to ALL OBD-pins
- VAGCOM v409-1 (KKL-Design)
- RS485 Duplex (12:A, 13:B)
- RS485 Half-Duplex (12:A, 13:B)
- Carsoft BMW 6.5/7.3
- Carsoft MB 7.4
- Carsoft MB 7.4 - OBDII
- Siemens Airbag 3.0
- NISSAN Consult I + Sync (10:TX, 2:RX, 7:SYNC)
- NISSAN Consult I - OBDII (12:TX, 13:RX)
- DIESEL-kit v1.0 Bluetooth ready
- VOLVO 9998555
- P.A.Soft BMW Scanner v1.2.5
- P.A.Soft BMW Scanner v1.3.6
- P.A.Soft BMW Scanner v1.4.0 Demo
- P.A.Soft BMW Scanner v1.4.x
- BMW EDIABAS: STD:OBD
- BMW EDIABAS: ADS
- BMW EDIABAS: D-CAN Combo (STD:OBD K + D-CAN)
- BMW EDIABAS: D-CAN Fast (STD:OBD D-CAN) Bluetooth ready
- BMW EDIABAS: D-CAN Fxx (STD:OBD D-CAN for F-series) Bluetooth ready
- BMW EDIABAS: JBE PT-CAN (STD:OBD + JBE CAN 500k) Bluetooth ready
- BMW EDIABAS: JBE K-CAN (STD:OBD + JBE CAN 100k) Bluetooth ready
- BMW EDIABAS: FEM x-CAN 6/14 (STD:OBD + FEM CAN 500k) Bluetooth ready
- ELM323 v2.0+ Bluetooth ready
- ELM327 v1.4+ Bluetooth ready
- ELM327 v1.4+ (ScanTool.net) Bluetooth ready
- DigiProg OBDII Flasher
- KWP2000 Flasher
- KWP2000 PLUS Flasher
- CMD EDC16 OBDII Flasher v1236 - K-Line
- CMD EDC16 OBDII Flasher v1244 - K-Line
- CMD EDC16 OBDII Flasher v1251 - CAN
- CMD EDC16 OBDII Flasher v1255 - K-Line
- CMD MAP3Diag
- CMD MPC5xx BDM Programmer v1251 (4/5:GND-6, 6:RST-1, 7I-7, 8:SCK-5, 14:IGN-2, 15O-8, 16:PWR-9)
- Galletto v1050/1080 EOBDII Flasher
- Galletto v1245 EOBDII Flasher
- Galletto v1250 EOBDII Flasher
- Galletto v1260 EOBDII Flasher
- VAG K+CAN Commander v1.4/v2.5/v3.6
- LICZNIK USB Dongle for v4.8a
- Lawicel CAN232 v3 (6:High, 14:Low) Bluetooth ready
- Lawicel CANUSB v1 (6:High, 14:Low)
- PonyProg2000 (4/5:GND-10, 6:IN#-6, 7:OUT#-5, 8:SCLK#-4, 14:VCC/RST-1/3, 15:RST#-2)
- EDiTH Eberspacher ISO Adapter
- OpenPort v1
- OpenPort v1.2
- OpenPort v1.3 Universal (11:Vpp/Boot)
- MultiECUScan Bluetooth ready
- PassThru SAE J2534-1/2 Bluetooth ready
- PassThru SAE J2534-1/2 - BMW up to 2008 Bluetooth ready

Additional equipment
OBDII-Female to DB15-Male Cable
DB15-Female to OBDII-Male-16pins Adapter
DB15-Female to BMW-Male-20pins Adapter
DB15-Female to BMW-Male-20pins Cable

Status
Production (available from stock)

[ciccio84]

Carlo ho postato tutta la specifica copiata dal sito -------- e mi è apparso il messaggio che deve essere approvato dal moderatore forse ho sbagliato a postarlo?

[admin]

Tranquillo vai pure, pero' evitiamo di fare publicita' a altri siti

[ciccio84]

Ok grazie!!!
Carlo riesci a capirci qualcosa?

[cinqueturbo]

Non ho capito a cosa serve questa interfaccia.. sul web trovo info poco chiare qualcuno mi illumina?

[ciccio84]

Cinqueturbo è un'interfaccia che è in grado di emulare interfaccie originali kkl,vag,ecc.ecc.Io la uso con il multiecuscan per il momento però vorrei capire come usarla con altri programmi