first steps on the ecm

[giobarbone]

I have to change the name??

[giobarbone]

I have changed everything I said to the cio's guide? turbo injection choked (which I don't know what it refers to) and torque limiter
then I ? released over boost nn I touched it and other types of limiters and caverns of injection types that I've touched

[megamind]

Hi all I'm also studying and I take this opportunity to ask if you know why there are three tables with different values for the pressure turbo?
The unit in question ? a edc16c31. I enclose the three tables.

[megamind]

With the usual problems of ecm ...I have a map that ecm calls map2 boostxrpm seen that I do not trust very much I ask you an opinion,
the address ? dc228.
Give me a hand as to call it? The bp. rpm up to 5000 mm3 and diesel up to 75.
Should be early, but I'm not convinced. Conversion factor may be 0,023437 if in advance you speak.
There are 3 maps 16x16.
The map1 boostxrpm ? definitely early, but there are 5 tables 16x16.
How do I know with certainty that this map 2 this is in advance?
C'? a test that I can make it through the log of the diagnosis?


Thanks

[marco]

hi everyone, new to the forum. I wanted to know kindly smoothing on ecm2001 ignezioneparzializzato means that touch the amount of diesel fuel? shot zoned map1 want to say laira that I introduce and map 2 the air that comes out and so that it works. and another thing to kindly if someone can help me I have as a guinea pig alfa 159 jtd 150hp as that by or. and' a little dead under by force what percentage I have to work to give to him a few horses. thanks

[msport (exil77grande)]

hi everyone, new to the forum. I wanted to know kindly smoothing on ecm2001 ignezioneparzializzato means that touch the amount of diesel fuel? shot zoned map1 want to say laira that I introduce and map 2 the air that comes out and so that it works. and another thing to kindly if someone can help me I have as a guinea pig alfa 159 jtd 150hp as that by or. and' a little dead under by force what percentage I have to work to give to him a few horses. thanks

hello,I invite you to:
-read the rules
-introduce yourself in the appropriate section
-after you have done that, open a specific post to your problems and ask for help them
-if you want some advice a good post ori and mod always in the suitable section and we'll give you some advice otherwise you can contact the online service of the forum
good continuation.

[marco]

ok thanks for the pecisazione

[marco]

but if you do not find the three numbers the same I suggest you to try the ones that are and surely you will open the ecu.

[bart]

Hello giobarbone,
You should first locate the drivers with the same number of HW and SW of your unit, select and open them!
Then select the file ori and the open and at the top you should see the drop-down menu: injection, turbo and limiters!
If not, first choose the correct driver for it, you will never be the menu that you are looking for...
What is written above refers to the 2001 version, but for the tytanium ? similar to... You which version you have?

[giobarbone]

then I have to prove I still have something wrong..
xke I get a sign that I need to encode in edc16 ie??