This is the link to the pcb Rework is valid for the V53 and V54 safe;:
[img]http://i62.tinypic*****/fnuuc3.jpg[/img]
This is the link to the pcb Rework is valid for the V53 and V54 safe;:
[img]http://i62.tinypic*****/fnuuc3.jpg[/img]
In the meantime, we are on the subject, passion motors, I will explain what is the use of the male/female adapter obd in the box with the wing nut.
I I opened it and inside I find 2 pins connected together.
Will mica to give 12v to the drive that does not carry the 12v to the port that the obd??
Rare, but there are in circulation. I had an A6 2500TDI V6 2000 if connect the launch that takes the current from the obd, the launch is not lit.
And if you connect the delphi DS150-AND he said, failed to connect, again because of the 12v is absent on port OBD.
post a photo
From the outside it is a adapter obd, male one side and female on the other.
You will see all the photos of the contents of the gall online
not me I would mistake but this is the adapter for the truck. now that we're on, that you think of dell hardware, this cock is the one with the plastic case of this I have been changed by the seller after the one with the houses in the aluminum I was in the bdm. this l I have tried in the bdm and in the serial and it seems to be 20151115_141618.jpg
without photos, I can't answer you there are 2 adapters in the photos online
try to zoom in on the photo and see if you can read the components
Passion motors are you referring to me or to fabiuz?Originally Written by passion engines
it was reported to You, however if you can view the photos Fabiuz already have directions and check your
Ok thanks a lot...but then in circulation there are clones that already have some components good?
Quote
